Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular metal power supply unit with ventilation slots and connector panel

KHACHIMO

KHACHIMO PWR-C1-715WDC 715W Catalyst WS-C9300 Switch Power Supply

SKU CH-JR2N-064NQ

715 W DC power supply for Catalyst WS-C9300 switches, tested and working

  • TypeATX
  • 715 W output powers Catalyst 9300 switches reliably
  • Tested working before shipment for dependable operation
  • ATX form factor fits standard switch bays
  • New unit delivers full rated performance out of the box

715W Power Supply for Catalyst WS-C9300

This 715W unit is built for the Catalyst WS-C9300 switch platform and arrives in new condition. It uses an ATX form factor and has been tested working by the supplier. The part suits network engineers who need a direct replacement for the original PWR-C1-715WDC module.

Confirm the 715W rating matches the switch chassis

The single specification that decides fit is the 715W output rating paired with the Catalyst WS-C9300 designation. If the chassis calls for a different wattage or a different series, this unit will not be compatible. Buyers who need a higher or lower power rating should look for the module specified for their exact switch model.

Helstu kostir

  • 715 W output powers Catalyst 9300 switches reliably
  • Tested working before shipment for dependable operation
  • ATX form factor fits standard switch bays
  • New unit delivers full rated performance out of the box

Tæknilýsing

TypeATX

Spurningar um þessa vöru

What does the 715W rating mean when this supply is installed in a Catalyst 9300 switch?

It is the maximum continuous DC power the unit can deliver to the switch chassis, so the 9300 can draw up to 715 watts for PoE, line cards and system logic without tripping the supply.

What interface does this power supply use to connect to the Catalyst 9300?

It slides into the dedicated front-access power-supply bay on the 9300 chassis and mates with the proprietary high-current connector that carries both main and auxiliary rails.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.