Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
KingSpec VP14000 4TB M.2 2280 SSD bare circuit board no heatsink

KingSpec

KingSpec VP14000 4TB PCIe 5.0 x4 M.2 2280 internal SSD

SKU CH-ZK6B-SE9RK

A 4 TB M.2 2280 internal SSD with PCIe 5.0 x4 interface and NVMe 2.0 protocol, reaching 14835 MB/s sequential read and 13297 MB/s sequential write for AI computing, gaming and heavy-duty workstations

  • Device TypeInternal Solid State Drive (SSD)
  • Used ForConsumer
  • Form FactorM.2 2280
  • Capacity4TB
  • Memory Components3D TLC
  • InterfacePCI-Express 5.0 x4

Capacity 4TB

  • Sequential reads up to 14835 MB/s accelerate large-file workflows
  • Sequential writes up to 13297 MB/s keep content creation moving
  • Random reads up to 1145000 IOPS cut load times for games and AI tasks
  • 2400 TBW rating supports heavy daily workloads for years
  • 4TB capacity stores entire libraries without juggling drives

Capacity and audience

The KingSpec VP14000 provides 4TB of storage on an M.2 2280 form factor using 3D TLC NAND. It targets consumer desktops, laptops and the PS5 that require large capacity for games, creative projects and AI workloads.

Sustained load behaviour

Active power draw reaches 10.3W while idle consumption sits at 1W. The drive is rated for 2400TB written and an MTBF of 1000000 hours, indicating endurance for long-term heavy workloads without a dedicated heatsink.

Interface practical limits

The PCIe 5.0 x4 interface with NVMe 2.0 protocol delivers up to 14835 MBps sequential read and 13297 MBps sequential write. Random performance reaches 1145000 IOPS read and 1087000 IOPS write, and the drive remains backward compatible with PCIe 4.0 platforms.

Helstu kostir

  • Sequential reads up to 14835 MB/s accelerate large-file workflows
  • Sequential writes up to 13297 MB/s keep content creation moving
  • Random reads up to 1145000 IOPS cut load times for games and AI tasks
  • 2400 TBW rating supports heavy daily workloads for years
  • 4TB capacity stores entire libraries without juggling drives

Tæknilýsing

BrandKingSpec
SeriesVP Series
ModelVP14000
Part NumberVP14000-4TB
Device TypeInternal Solid State Drive (SSD)
Used ForConsumer
Form FactorM.2 2280
Capacity4TB
Memory Components3D TLC
InterfacePCI-Express 5.0 x4
ProtocolNVMe 2.0
Max Sequential ReadUp to 14835 MBps
Max Sequential WriteUp to 13297 MBps
4KB Random ReadUp to 1145,000 IOPS
4KB Random WriteUp to 1087,000 IOPS
Terabytes Written (TBW)2400TB
MTBF1,000,000 hours
HeatSinkwithout HeatSink
Power Consumption (Idle)1W
Power Consumption (Active)10.3W
Operating Temperature0°C ~ +70°C
Storage Temperature-40°C ~ +85°C
Operating Humidity5-95%
Height2.10mm
Width22mm
Depth80mm
Weight50g

Aðrar útgáfur af þessari vöru

2 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much power does the VP14000 draw when it runs at full speed all day?

The drive consumes 10.3W during active use and drops to 1W when idle, so sustained workloads stay within a modest power envelope.

What motherboard slot and protocol does the VP14000 need to operate?

It requires an M.2 2280 slot wired for PCI-Express 5.0 x4 and the NVMe 2.0 protocol.

Will the VP14000 work at reduced speed if I install it in a PCIe 4.0 system I already own?

Yes, the drive is backward compatible with PCIe 4.0 platforms, though sequential speeds will be limited to the 4.0 interface ceiling.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.