Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

Kingston Technology Corp.

Kingston Technology Corp. KVR667D2D4F5/4GI 4GB DDR2 667 ECC Fully Buffered server RAM

SKU CH-SJ6H-VTM15 MPN KVR667D2D4F5/4GI

4 GB DDR2 667 ECC fully buffered DIMM with CL5 latency and heat spreader for compatible Intel servers

  • Capacity4GB
  • Type240-Pin DDR2 SDRAM
  • SpeedDDR2 667 (PC2 5300)
  • CAS LatencyCL5
  • Voltage1.80V
  • ECCYes
  • ECC protection guards data integrity in critical workloads
  • Fully buffered architecture reduces electrical load on the memory controller
  • 4 GB capacity adds headroom for virtualisation and databases
  • 667 MHz DDR2 speed matches PC2-5300 server specifications
  • 240-pin form factor fits compatible Intel SR1500 server slots

Server Memory for Intel Platforms

This 4 GB DDR2 module targets administrators maintaining legacy Intel SR1500AL or SR1500ALSAS servers. Fully Buffered architecture with ECC protects data integrity in multi-socket environments where uptime is critical. The 240-pin form factor fits the specific DIMM slots used by these platforms.

Upgrade Path from Unbuffered DDR2

Replaces non-ECC or registered DDR2 modules that lack the advanced memory buffer required by the chipset. The jump is worth it when the server BIOS reports memory errors or the workload demands the signal integrity of Fully Buffered technology. Dual Rank organisation increases density per slot without changing the memory controller configuration.

DDR2 667 Interface Constraints

The PC2 5300 standard caps throughput at the rated 667 MT/s with CL5 latency at 1.80 V. No higher DDR2 speeds or later DDR generations are electrically compatible with this slot. Capacity is limited to the module's 4 GB per DIMM and the maximum rank count the memory controller supports.

Helstu kostir

  • ECC protection guards data integrity in critical workloads
  • Fully buffered architecture reduces electrical load on the memory controller
  • 4 GB capacity adds headroom for virtualisation and databases
  • 667 MHz DDR2 speed matches PC2-5300 server specifications
  • 240-pin form factor fits compatible Intel SR1500 server slots

Tæknilýsing

BrandKingston
ModelKVR667D2D4F5/4GI
Capacity4GB
Type240-Pin DDR2 SDRAM
SpeedDDR2 667 (PC2 5300)
CAS LatencyCL5
Voltage1.80V
ECCYes
Buffered/RegisteredFully Buffered
Heat SpreaderYes
FeaturesDual Rank
Sendingarþyngd0.03 kg
Stærð sendingar171 × 57 × 14 mm

Spurningar um þessa vöru

Will this 240-pin DDR2 module fit my server board?

Yes — it uses the standard 240-pin DDR2 form factor, so it fits any slot keyed for DDR2 667.

Do I need to enable ECC in the BIOS after installing this fully buffered stick?

Install the module, then enter BIOS and set the memory mode to ECC or Fully Buffered; skipping that step leaves error correction inactive.

How long before the heat spreader needs cleaning or replacement?

The spreader is passive and maintenance-free; only remove dust with compressed air during routine server cleaning.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.