Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Light grey sandstone filament spool, 2.85 mm diameter, 0.25 kg weight

Lay Filaments

Lay Filaments LAY-BRICK 3.0mm 0.25kg sandstone filament

SKU CH-NHHH-11WZV

Sandstone-based filament prints stone-like decorative pieces at 165–210 °C with a 0.25 kg spool

  • Sandstone-polymer blend yields realistic stone texture
  • ±0.1 mm diameter tolerance ensures consistent extrusion
  • Prints at 165–210 °C with 20–40 °C bed
  • 25 kg spool suits small decorative projects
  • Requires >0.40 mm nozzle to prevent clogging

Sandstone filament for decorative prints

Lay-Brick is a sandstone composite filament that produces a stone-like or ceramic surface finish on printed objects. The material contains a binding polymer mixed with sandstone particles to create variable surface roughness. It is intended for makers who want decorative pieces with a mineral appearance rather than structural parts.

Printing window and nozzle requirements

The filament prints between 165 and 210 °C with a bed temperature of 20 to 40 °C. A nozzle larger than 0.40 mm is recommended to reduce the risk of clogging from the abrasive particles. Diameter tolerance is held to ± 0.1 mm on the 2.85 mm stock.

Small spool and abrasive handling

The 0.25 kg spool suits test prints or single decorative models without committing to a large roll. Because the sandstone content is abrasive, the manufacturer advises removing the filament from the hot-end after each session to prevent nozzle blockage. The composite material is more brittle than standard thermoplastics, so handle the spool gently during loading.

Helstu kostir

  • Sandstone-polymer blend yields realistic stone texture
  • ±0.1 mm diameter tolerance ensures consistent extrusion
  • Prints at 165–210 °C with 20–40 °C bed
  • 25 kg spool suits small decorative projects
  • Requires >0.40 mm nozzle to prevent clogging

Tæknilýsing

BrandLay Filaments

Spurningar um þessa vöru

Should I choose the 0.25 kg spool or a larger capacity for my project?

This listing supplies a single 0.25 kg spool of 3.0 mm filament. If your decorative piece needs more material, order multiple spools to match the total weight required.

What surface finish will the 165–210 °C printing range actually produce on my printed part?

Printing within that temperature window lets the sandstone-polymer blend create a stone-like or ceramic-like texture that can range from smooth to rough depending on the exact temperature used.

My printer takes 2.85 mm filament — will this 3.0 mm spool work and what nozzle size does it need?

The filament measures 2.85 mm with a ±0.1 mm tolerance, so it fits 2.85 mm systems. Use a nozzle larger than 0.40 mm to avoid clogging from the sandstone particles.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.