Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
LONGER RAY5 5W laser engraver with 3.5 inch touch screen, open frame design, silver and black finish

LONGER

LONGER RAY5 5W Laser Engraver 3.5" Touch Screen

SKU CH-3GGP-XPBYB

A 5 W laser engraver and cutter with a 0.08 mm dot size, 3.5-inch colour touch screen, 240 MHz ESP32 chipset, Wi-Fi control and 10000 mm/min speed for offline operation via TF card

  • TypeLaser Engraver & Cutter

Option RAY5 5W-2

  • RAY5 20W-2
  • RAY5 10W-2
  • RAY5 5W-2

Yfirstrikaðar útgáfur eru til, en ekki til hér.

  • Ultra-fine 0.08 mm laser dot for detailed engraving
  • 10000 mm/min engraving speed for fast project completion
  • 5 inch colour touch screen enables offline operation
  • 240 MHz ESP32 chipset provides responsive control
  • Wi-Fi connectivity allows web and app-based control

Laser engraver for DIY makers

The LONGER RAY5 is a 5 W laser engraver and cutter designed for hobbyists and small workshops. It works on metal and wood without requiring a permanent computer connection. The 3.5-inch colour touch screen gives direct control over every job.

Touch screen and offline workflow

A built-in controller lets you load files from a TF card and start engraving immediately. The 3.5-inch display shows progress and settings while the 240 MHz ESP32 chipset handles motion planning. Wi-Fi adds browser or app control for remote monitoring.

Fine detail at high speed

The .08 by .08 mm laser dot produces sharp detail on compatible materials. Engraving speed reaches 10000 mm/min for faster project completion. Users needing larger work areas or higher laser power will need a different machine.

Helstu kostir

  • Ultra-fine 0.08 mm laser dot for detailed engraving
  • 10000 mm/min engraving speed for fast project completion
  • 5 inch colour touch screen enables offline operation
  • 240 MHz ESP32 chipset provides responsive control
  • Wi-Fi connectivity allows web and app-based control

Tæknilýsing

TypeLaser Engraver & Cutter

Spurningar um þessa vöru

How often does the 5 W laser module need to be replaced?

The laser module is rated for continuous operation with thermal protection and current safety control, so replacement is only required if output drops after extended use.

What limits continuous cutting at 10000 mm/min?

Active position protection and thermal protection will pause the job if the head moves out of bounds or the module overheats during sustained runs.

How loud and hot does the 240 MHz ESP32 controller get during all-day engraving?

The 32-bit chipset runs cool with no moving parts; only the assist fan and stepper motors produce audible noise during operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.