Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
3.7 inch e-paper raw display module 480 by 280 pixels black and white SPI no PCB

LORDWORLD

LORDWORLD 3.7inch E-Paper Raw Display 480×280 SPI Without PCB

SKU CH-6N1K-8S42S

A 3.7 inch e-paper raw display with 480×280 resolution and SPI interface that retains images without power

  • 7 inch e-paper shows crisp 480×280 text without backlight
  • retains last image indefinitely after power removed
  • draws power only during screen refresh cycles
  • raw SPI panel integrates directly with Raspberry Pi or Jetson Nano

3.7inch E-Paper Raw Display SPI

This 3.7inch e-paper module presents a 480×280 pixel black and white image without a backlight. It connects through an SPI interface and ships without a printed circuit board. The panel retains the last displayed content for a long time after power is removed. Ultra low power consumption means energy is drawn only during a refresh cycle.

Makers integrating raw panels into custom boards

Developers building Raspberry Pi or Jetson Nano projects who want a compact reflective display can use this raw module. Buyers who need an assembled board with level shifting or a ready-to-mount bezel should look at a different product. Projects that require colour output or continuous video refresh rates are not suited to this panel.

Helstu kostir

  • 7 inch e-paper shows crisp 480×280 text without backlight
  • retains last image indefinitely after power removed
  • draws power only during screen refresh cycles
  • raw SPI panel integrates directly with Raspberry Pi or Jetson Nano

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

Does this 3.7inch display need a separate controller board to work with a Raspberry Pi?

The module is supplied without a PCB, so a compatible driver HAT or custom SPI interface board is required to connect it to a Raspberry Pi.

Can the 480×280 panel share the SPI bus with other sensors on a Jetson Nano?

Yes, the SPI interface allows the e-paper to share the bus with other devices using separate chip-select lines.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.