Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
LORDWORLD 5 inch DSI capacitive touchscreen development board, 800 by 480 resolution, glossy black finish, ribbon cable attached

LORDWORLD

LORDWORLD 5 Inch DSI Touchscreen 800×480 Capacitive Development Board

SKU CH-3092-93V1N

5-inch 800×480 capacitive touchscreen connects via DSI to Raspberry Pi and other boards, works driver-free on multiple operating systems, and supports five-point touch input

  • Plug-and-play on Raspberry Pi OS, Ubuntu, Kali, Retropie and RoPieee with no drivers needed
  • 5-point capacitive touch gives responsive multi-finger input for interactive projects
  • Native DSI link delivers 800×480 video while keeping HDMI and USB ports free
  • Works with Pi 5, 4, 3B+, 3A+, 3B, 2B, B+, A+, CM3, CM3+ and CM4 via adapter
  • Also runs on VisionFive2 (single touch) and Core3566 (5-point touch) under Debian or Ubuntu

5 Inch DSI Touchscreen for Raspberry Pi

This 5 inch capacitive display connects directly to the Raspberry Pi DSI port, supporting models from Pi 5 down to the original A+ and Compute Module 3 with an adapter. It targets makers and developers who need an integrated touchscreen without occupying the HDMI or USB ports.

800×480 resolution and 5-point touch capacity

The 800×480 panel provides enough pixel density for readable text and simple graphical interfaces on a 5 inch surface. Five simultaneous touch points allow multi-finger gestures, though VisionFive2 boards are limited to single touch under Debian and Ubuntu.

Driver-free DSI integration with multi-board support

Native DSI signalling keeps latency low and leaves HDMI and USB free for cameras, storage or other peripherals. The board works immediately on Raspberry Pi OS, Ubuntu, Kali, Retropie and RoPieee, and extends to VisionFive2 and Core3566 platforms without extra configuration.

Helstu kostir

  • Plug-and-play on Raspberry Pi OS, Ubuntu, Kali, Retropie and RoPieee with no drivers needed
  • 5-point capacitive touch gives responsive multi-finger input for interactive projects
  • Native DSI link delivers 800×480 video while keeping HDMI and USB ports free
  • Works with Pi 5, 4, 3B+, 3A+, 3B, 2B, B+, A+, CM3, CM3+ and CM4 via adapter
  • Also runs on VisionFive2 (single touch) and Core3566 (5-point touch) under Debian or Ubuntu

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

Will this 800×480 DSI touchscreen work with my older Raspberry Pi 3B+ without extra drivers?

Yes, it connects via the native DSI interface on Pi 3B+ and is plug-and-play on Raspberry Pi OS, Ubuntu, Kali, Retropie and RoPieee with no driver installation required.

How can I confirm the 5-point capacitive touch is working correctly after I connect it?

After booting a supported OS, open a drawing or calibration tool and verify that up to five simultaneous touch points register accurately across the 800×480 panel.

Does the package include the Raspberry Pi board or any adapter needed for a Compute Module 4?

The box contains the 5-inch DSI touchscreen development board only; the Raspberry Pi board and any CM4 adapter must be purchased separately.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.