Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with four blue USB ports and a 16 pin ribbon cable attached

LORDWORLD

LORDWORLD PCIe to USB 3.2 Gen1 HAT for Raspberry Pi 5 development board

SKU CH-KS21-JSQHT

Adds four USB 3.2 Gen1 ports to a Raspberry Pi 5 via its 16-pin PCIe interface, with power monitoring and a fan vent

  • Adds four USB 3.2 Gen1 ports via the Pi 5 PCIe interface
  • Driver-free plug-and-play connection using the 16-pin cable
  • Onboard chip monitors power status and enables software USB power control
  • Reserved vent improves airflow for cooler, more stable Pi 5 operation
  • EEPROM stores configuration data for reliable peripheral recognition

Expansion for Raspberry Pi 5

This HAT adds four USB 3.2 Gen1 ports to the Raspberry Pi 5 through its 16-pin PCIe interface. It is aimed at developers and makers who need more high-speed peripheral connections than the board provides natively. The driver-free design means it works immediately on supported operating systems.

Build integration and cooling

The board connects via a 16-pin cable to the Pi 5’s PCIe connector, leaving the GPIO header free for other HATs or sensors. An onboard power monitoring chip and EEPROM allow software control of each USB port’s power state. A reserved airflow vent lets you add a cooling fan to keep the Pi 5 running stably under sustained loads.

Capacity and limits

Four USB 3.2 Gen1 ports give enough bandwidth for multiple storage drives, cameras or other high-speed devices at the same time. The PCIe link itself is the bottleneck, so total throughput across all ports cannot exceed the single-lane Gen 3 ceiling. Users needing more than four ports or higher aggregate bandwidth will need a different approach.

Helstu kostir

  • Adds four USB 3.2 Gen1 ports via the Pi 5 PCIe interface
  • Driver-free plug-and-play connection using the 16-pin cable
  • Onboard chip monitors power status and enables software USB power control
  • Reserved vent improves airflow for cooler, more stable Pi 5 operation
  • EEPROM stores configuration data for reliable peripheral recognition

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

How many USB 3.2 Gen1 ports does the HAT add to the Raspberry Pi 5?

The board extends the Pi 5 PCIe interface to four high-speed USB 3.2 Gen1 ports for additional peripherals.

Does the HAT include any active cooling or only passive airflow?

A reserved airflow vent is provided for a cooling fan; the HAT itself has no built-in fan.

What connection does the Raspberry Pi 5 need to use this HAT?

The HAT connects through the Pi 5 16-pin PCIe interface using the supplied 16-pin cable.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.