Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Round LCD development board in CNC metal case with acrylic base

LORDWORLD

LORDWORLD RP2040 development board 1.28inch round touch LCD 240×240 65K RGB IPS CNC metal case 30 GPIO 133 MHz

SKU CH-3QD6-7W58T

A development board with a 1.28 inch round touch LCD, 240×240 65K RGB IPS display, dual-core RP2040 at 133 MHz, 30 GPIO pins and a CNC metal case

  • Round 1.28-inch IPS touchscreen shows 65K colours at 240×240
  • Dual-core RP2040 runs up to 133 MHz for responsive code
  • CNC metal case with acrylic base protects the board
  • 30 configurable GPIO pins enable flexible project wiring
  • C/C++ and MicroPython SDKs with tutorials speed up development

RP2040 board with 1.28 inch round touch LCD

This development board pairs a Raspberry Pi RP2040 dual-core Arm Cortex-M0+ processor with a 1.28 inch round IPS display. The screen delivers 240×240 pixels in 65K RGB colour and includes touch input. A CNC metal case with an acrylic dull-polish bottom plate encloses the board. The processor runs at up to 133 MHz and provides 30 multi-function GPIO pins.

Makers and educators wanting an all-in-one RP2040

The integrated display, touch layer, accelerometer and gyroscope suit wearable prototypes, sensor dashboards and classroom demos. Developers who need wireless connectivity, a larger screen or a different form factor should look at other boards. Projects requiring more than 30 GPIO pins or a higher clock speed will not be served by this hardware.

Check power supply and development environment

The board is powered through the RP2040 USB interface, so a suitable USB cable and 5 V source are required. Verify that your host computer can run the C/C++ or MicroPython toolchains supported by the vendor SDK. Ensure your enclosure design accommodates the round CNC metal case and the exposed GPIO header pitch.

Helstu kostir

  • Round 1.28-inch IPS touchscreen shows 65K colours at 240×240
  • Dual-core RP2040 runs up to 133 MHz for responsive code
  • CNC metal case with acrylic base protects the board
  • 30 configurable GPIO pins enable flexible project wiring
  • C/C++ and MicroPython SDKs with tutorials speed up development

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

Do I need a USB-C cable and a computer to program the RP2040 board with the 1.28 inch round touch LCD?

Yes, connect the board to a PC with a USB-C cable and use the supplied SDK or MicroPython toolchain to flash code onto the RP2040.

Can I keep using my existing 5 V sensors with the 30 multi-function GPIO pins on this RP2040 development board?

The GPIO pins operate at the RP2040 logic level, so 5 V signals require level shifting before they connect to the 30 pins.

How can I verify the 240×240 65K RGB IPS display is working after I upload my first script?

Run the included display demo — the 1.28 inch screen should show colour test patterns and respond to touch input across the full 240×240 area.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.