Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Round 1.28 inch touch LCD in CNC metal case with acrylic dull-polish bottom plate

LORDWORLD

LORDWORLD RP2350 Development Board 1.28inch Touch LCD Metal Case 240×240

SKU CH-8RFP-BG8XS

Development board with 1.28 inch 240×240 touch LCD in a CNC metal case, running RP2350 dual-core dual-architecture MCU for Arm and RISC-V experiments

  • RP2350 dual-core architecture enables Arm Cortex-M33 or Hazard3 RISC-V development
  • 28 inch round touch LCD with 240×240 pixel 65K colour IPS display
  • CNC metal case provides fast heat dissipation with acrylic dull-polish bottom plate
  • Comprehensive SDK and tutorials support C/C++, MicroPython and Arduino environments
  • Compact form factor suits smart device prototyping and human-computer interaction projects

RP2350 dual-core development board

The LORDWORLD RP2350 board pairs a 1.28 inch round touch LCD with a CNC metal case for embedded projects. It targets makers and engineers who need a compact platform for smart-device prototyping and human-computer interaction experiments.

Upgrade from single-architecture MCUs

The RP2350 lets you switch between dual Arm Cortex-M33 cores and dual Hazard3 RISC-V cores on the same hardware. The jump is worth it when you want to compare architectures or migrate code without changing boards.

240×240 IPS display with 65K colour

The 1.28 inch screen handles touch-driven menus, sensor dashboards and simple graphics comfortably. It runs out when an application needs higher resolution, larger touch area or more than 65 thousand colours.

Helstu kostir

  • RP2350 dual-core architecture enables Arm Cortex-M33 or Hazard3 RISC-V development
  • 28 inch round touch LCD with 240×240 pixel 65K colour IPS display
  • CNC metal case provides fast heat dissipation with acrylic dull-polish bottom plate
  • Comprehensive SDK and tutorials support C/C++, MicroPython and Arduino environments
  • Compact form factor suits smart device prototyping and human-computer interaction projects

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

What are the exact dimensions of the 1.28inch round touch LCD so I can check clearance?

The display is a 1.28inch round panel with a 240×240 pixel resolution and 65K colour depth; the CNC metal case wraps the board and the acrylic bottom plate sits flush, so the overall stack height is set by the case walls.

How do I flash firmware onto the RP2350 dual-core MCU and which boot mode do developers often miss?

Hold the BOOTSEL button while connecting USB to enter mass-storage mode, then drag a UF2 file built for either the Arm Cortex-M33 or Hazard3 RISC-V cores; forgetting BOOTSEL leaves the previous application running.

Which parts of the LORDWORLD RP2350 board will need attention after extended use?

The 6-axis motion sensor and capacitive touch layer on the 1.28inch IPS display have no moving parts, so only the USB connector and the acrylic bottom-plate screws may require occasional re-tightening or cleaning.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.