Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

LORDWORLD

LORDWORLD TurboSwap MB171SP-1B 3.5" SAS/SATA Hard Drive Adapter

SKU CH-EWSH-9ZWA6

Tool-free tray lets you hot-swap a single 3.5" SAS or SATA drive into any 5.25" bay at up to 12 Gbps

  • Fits any standard 5.25" bay for quick storage expansion
  • Tray-less mechanism lets you hot-swap 3.5" drives without tools or screws
  • Supports both SAS and SATA hard drives for flexible deployment
  • Delivers up to 12Gbps SAS or 6Gbps SATA throughput
  • Locking SATA data and power cables prevent accidental disconnection

Drive-bay adapter for 3.5-inch SAS and SATA drives

The LORDWORLD TurboSwap MB171SP-1B fits a single 3.5-inch SAS or SATA hard drive into a standard external 5.25-inch bay. A SAS host controller is required when a SAS drive is used. It is built for users who need to insert or remove bare drives quickly without opening the case.

Tray-less mechanism with locking cable support

The tray-less design lets a drive slide straight into the bay and lock in place without tools or screws. Standard SATA data and power cables with locking latches are supported, so connections stay secure during transport or vibration. Builders who need a second simultaneous drive or a 2.5-inch form factor cannot use this single-slot enclosure.

Passive cooling with no added power draw

The enclosure has no fan or active electronics, so it adds zero noise and draws no power beyond the drive itself. Heat dissipates through the metal shell into the chassis airflow. Users who require hardware RAID, port multiplication or SAS expander functions will not find those features here.

Helstu kostir

  • Fits any standard 5.25" bay for quick storage expansion
  • Tray-less mechanism lets you hot-swap 3.5" drives without tools or screws
  • Supports both SAS and SATA hard drives for flexible deployment
  • Delivers up to 12Gbps SAS or 6Gbps SATA throughput
  • Locking SATA data and power cables prevent accidental disconnection

Tæknilýsing

BrandLORDWORLD

Spurningar um þessa vöru

Does the TurboSwap MB171SP-1B support full SATA 3.0 6Gbps and SAS 3.0 12Gbps speeds?

Yes, the adapter handles SATA 3.0 at 6Gbps and SAS 3.0 at 12Gbps on a single SAS channel, so the drive runs at its native interface limit.

What bay size and drive size does the MB171SP-1B fit?

It mounts in a standard external 5.25" bay and accepts one 3.5" SAS or SATA hard drive.

How is the drive installed and what step is often missed?

Slide the bare drive straight into the tray-less slot until the SATA data and power connectors with locking latches click; the latch click is the step people skip, leaving the drive loose.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.