Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
3.5 inch touch screen with case for Raspberry Pi 3 B+

MCDODO

MCDODO 3.5" Touch Screen 320x480 with Case for Raspberry Pi 3 B+

SKU CH-35XP-KYENZ

A 3.5 inch resistive touch screen with 320x480 resolution and protective case connects directly to a Raspberry Pi 3 B+ via SPI at up to 125 MHz for roughly 50 fps video and gaming.

  • TypeSingle Board Computers
  • 5 inch touch display with 320x480 resistive panel
  • Direct SPI connection to Raspberry Pi 3 B+ without extra power
  • 125 MHz signal input delivers stable 50 fps video and gaming
  • Pre-installed driver image supports Raspbian Ubuntu Kali RetroPie
  • Split-design protective case with nylon columns for balanced mounting

Purpose-built 3.5 inch touch display

This 3.5 inch TFT LCD panel is designed to sit directly on a Raspberry Pi 3 B+ without extra wiring. It delivers a physical resolution of 320x480 pixels and includes a resistive touch layer for stylus or fingertip input. A matching split-design case ships in the box to protect both the screen and the board.

Replaces HDMI monitors for headless projects

The module connects through the SPI bus and draws power from the Pi header, so no separate supply or HDMI cable is required. FBCP software mirroring lets the desktop appear on both this screen and an external display at the same time. Builders who need a compact, self-contained interface for kiosks, retro consoles or portable sensors will benefit most.

Steady 50 fps output under continuous use

The controller accepts a 125 MHz SPI clock and sustains roughly 50 frames per second without flicker, enough for video playback and gameplay during long sessions. Pre-installed driver images for Raspbian, Ubuntu, Kali and RetroPie remove the need for manual kernel configuration. Buyers who require higher resolution, capacitive multi-touch or HDMI input should look elsewhere.

Helstu kostir

  • 5 inch touch display with 320x480 resistive panel
  • Direct SPI connection to Raspberry Pi 3 B+ without extra power
  • 125 MHz signal input delivers stable 50 fps video and gaming
  • Pre-installed driver image supports Raspbian Ubuntu Kali RetroPie
  • Split-design protective case with nylon columns for balanced mounting

Tæknilýsing

TypeSingle Board Computers

Spurningar um þessa vöru

What Raspberry Pi board does the 3.5 inch 320x480 screen mount on directly?

The screen connects directly to the Raspberry Pi 3 B+ GPIO header using SPI, requiring no extra power supply for the display itself.

Which step do users often miss when setting up the touch screen with the included case?

Install the FBCP software driver or use the pre-installed system image so the framebuffer copies to the SPI screen; without it the display stays blank.

How is the resistive touch panel calibrated or maintained over time?

Calibration is done through the Raspbian, Ubuntu, Kali or RetroPie input settings; the white nylon columns keep the screen balanced and the split case allows easy access for cleaning.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.