Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Pink 30cm PSU cable extension kit with 24-pin ATX two 4+4-pin CPU three 6+2-pin GPU and cable combs

myVolts

myVolts 30cm PSU Cable Extension Kit Pink 18AWG 1200W

SKU CH-R96X-5KARR

A 30 cm pink extension kit adds 18AWG UL1015 tinned copper cables for 24-pin, dual 4+4-pin CPU and triple 6+2-pin GPU power with 1200 W capacity and 200 °C rating, plus 18 cable combs for tidy routing

  • TypeAT
  • Professional build quality with 18AWG UL1015 tinned copper wire
  • 1200W power handling for high-performance GPU and CPU configurations
  • 200°C temperature rating from Teflon jacket exceeds standard cable limits
  • Complete extension set includes 24-pin ATX, two 4+4-pin CPU, three 6+2-pin GPU cables
  • 300mm length with 18 cable combs enables clean routing in any case

Build-ready cable kit

This 30 cm PSU cable extension kit supplies one 24-pin ATX motherboard cable, two 4+4-pin CPU cables and three 6+2-pin GPU cables in a pink finish. It is aimed at enthusiasts who want tidy, colour-coordinated routing inside a custom-mod build. The high-density braided sleeves and included combs keep every run straight and clean.

18 AWG 1200 W rating

Each wire uses 18 AWG UL 1015 tinned copper rated for 200 °C and 1200 W total power handling. The silver-coated conductors and Teflon jacket deliver heat and humidity resistance while keeping the overall diameter thinner than traditional sleeved cables. This specification decides whether the kit matches your power-supply output and thermal requirements.

Modular routing flexibility

Extensions plug between your existing PSU cables and components, so no PSU replacement is needed and cable management stays modular. The 300 mm length adds reach for rear-routed builds while the 15 eight-pin combs and three 24-pin combs lock every wire in place. The kit frees you from stock cable colours and clutter without changing any other hardware.

Helstu kostir

  • Professional build quality with 18AWG UL1015 tinned copper wire
  • 1200W power handling for high-performance GPU and CPU configurations
  • 200°C temperature rating from Teflon jacket exceeds standard cable limits
  • Complete extension set includes 24-pin ATX, two 4+4-pin CPU, three 6+2-pin GPU cables
  • 300mm length with 18 cable combs enables clean routing in any case

Tæknilýsing

TypeAT

Spurningar um þessa vöru

How much power can the 18AWG extensions actually carry once installed in a system?

The kit is rated for 1200W total, so the 18AWG wires can handle that load across the motherboard, CPU and GPU cables combined.

What connector standard do these extensions use and what does it limit?

They use standard ATX 24-pin, EPS 4+4-pin and PCIe 6+2-pin connectors, so they are limited to the pin counts and current ratings defined by the ATX specification.

What clearance and mounting hardware are needed to fit the 30cm cables and combs?

Each cable is 30cm long with an overall diameter thinner than typical sleeved cables; the kit includes 3 large and 15 small combs that snap onto the wires for routing.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.