Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Compact Pico-ATX board with 24-pin connector and cables

myVolts

myVolts Bayda 19V 200W Pico ATX Power Supply

SKU CH-5QPF-4Q01H

A fanless 200 W Pico ATX unit accepting 16 V to 24 V input and measuring 63 x 28 x 11.4 mm

  • TypeAT
  • Silent operation with fanless design
  • 200 W output from 16–24 V input
  • Solid polymer capacitors for long life
  • Ultra-compact 63 × 28 × 11.4 mm footprint
  • Ideal power solution for ITX motherboards

Pico ATX power for compact builds

The myVolts Bayda is a 19V input Pico ATX supply rated at 200 W output. It targets builders assembling thin ITX systems or mining rigs that run from a 16–24 V DC source. The module replaces a conventional ATX brick and plugs directly into a 24-pin motherboard connector.

Fanless polymer-capacitor construction

Solid polymer capacitors on the PCBA are specified for long service life. The 63 x 28 x 11.4 mm board has no moving parts, so operation is completely silent. A bundled cable set connects the module to the motherboard and peripheral leads, keeping cable routing simple inside space-constrained chassis.

Silent 200 W thermal envelope

With no fan, heat dissipates through the PCB and the surrounding airflow in the case. The unit accepts a wide 16–24 V input range and delivers up to 200 W continuous power within that envelope. Builders must ensure the case provides adequate passive ventilation to keep temperatures stable under load.

Helstu kostir

  • Silent operation with fanless design
  • 200 W output from 16–24 V input
  • Solid polymer capacitors for long life
  • Ultra-compact 63 × 28 × 11.4 mm footprint
  • Ideal power solution for ITX motherboards

Tæknilýsing

TypeAT

Spurningar um þessa vöru

What input voltage range does the 19 V 200 W Pico ATX unit accept?

It operates from a 16 V to 24 V DC source, so a 19 V laptop-style brick or compatible battery pack will power it.

Will the 63 mm by 28 mm board with 11.4 mm height clear my ITX case and motherboard standoffs?

The module measures 63 x 28 x 11.4 mm and uses a standard 24-pin ATX connector, fitting most ITX layouts without interfering with nearby headers.

How do I connect the 150 W ATX module cable to the motherboard without bending the 24-pin plug?

Route the short harness first, align the keyed 24-pin connector squarely, then press straight down until the latch clicks — forcing it at an angle is the common mistake.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.