Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Rectangular silver metal power supply unit with ventilation slots and terminal connections

myVolts

myVolts LRS-350-12/24/48V 350W AC/DC power supply

SKU CH-8DA4-M8GV7

A compact AC/DC switching supply delivering 350 W at 12 V or 24 V with overload, over-voltage and short-circuit protection

  • TypeAT
  • Thin design saves space in tight enclosures
  • 350 W output powers demanding mining rigs
  • Overload, overvoltage and short-circuit protection guard equipment
  • Wide 94-264 V input suits global mains supplies
  • 12 V and 24 V outputs with ±1.0 % accuracy

Thin AC/DC unit for 350 W loads

The myVolts LRS-350-12/24/48V is a 350 W switching power supply that converts 94-264 V AC mains into regulated DC output. It is aimed at builders who need a compact source for mining rigs, test benches or general electronic equipment. The half-bridge PWM design delivers up to 14.6 A on the 12 V or 24 V rails with ±1.0 % voltage accuracy.

Fits open-frame builds and rack trays

The thin profile suits open mining frames or shallow rack shelves where a standard ATX unit would not sit flat. Screw terminals accept stripped wires so no proprietary cables are required, freeing the builder from cable-management bulk. Overload, overvoltage and short-circuit protection guard connected hardware without extra external circuitry.

Steady output from -10 °C to 60 °C

Rated for continuous operation across a -10 °C to 60 °C ambient range, the supply maintains 100 % work efficiency and 150 mVp-p ripple under full load. Voltage and load regulation stay within ±0.5 % during sustained draws, so output rails remain stable during long mining shifts or extended test sessions. Not suited for builds that require 48 V output or ATX-form-factor mounting.

Helstu kostir

  • Thin design saves space in tight enclosures
  • 350 W output powers demanding mining rigs
  • Overload, overvoltage and short-circuit protection guard equipment
  • Wide 94-264 V input suits global mains supplies
  • 12 V and 24 V outputs with ±1.0 % accuracy

Tæknilýsing

TypeAT

Spurningar um þessa vöru

What is the maximum output power before the overload protection activates?

The overload protection engages when the load exceeds 350 W continuous output.

How much ripple noise appears on the DC output under full load?

Output ripple noise is specified at 150 mV peak-to-peak at full load.

What AC input voltage range must the site supply for this unit to operate?

The power supply accepts an AC input range of 94 V to 264 V at 50-60 Hz.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.