Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

myVolts

myVolts PCI-E 1 to 6 USB 3.0 Riser Card

SKU CH-DS71-Y4GV6

Adds six USB 3.0 ports through a single PCI-E 1x slot without extra power cables

  • TypeAT
  • Adds six USB 3.0 ports through a single PCI-E 1X slot
  • Works with PCI-E 1X, 4X, 8X and 16X motherboard slots
  • Draws power directly from the PCI-E slot — no extra cable required
  • Compatible with Windows XP through Windows 11 plus Linux
  • Compact 4.5 by 2.7 inch card fits easily inside the case

Expand PCI-E 1X to Six USB 3.0 Ports

This myVolts adapter turns a single PCI-E 1X slot into six USB 3.0 connectors for riser cards. It fits PCI-E 1X, 4X, 8X and 16X slots without an extra power cable. The board draws power directly from the slot, keeping the motherboard supply isolated. Target users are miners or builders who need many risers on one board.

Replaces Multiple Single-Port Risers

Instead of occupying several PCI-E slots with individual risers, this card consolidates six connections into one slot. The jump is worth it when the motherboard has limited PCI-E lanes but spare USB 3.0 headers. It is not for builders who need more PCI-E lanes than the chipset provides or who require direct GPU-to-CPU bandwidth.

Tool-Less Install With Keyed Headers

The card plugs straight into the PCI-E slot and screws to the case bracket. Only one cable runs to the slot, so cable routing stays simple. An onboard IC heatsink handles heat without a fan. What usually goes wrong: reversing the custom power lead or forcing the connector offsets, which can burn the board or snap header pins.

Helstu kostir

  • Adds six USB 3.0 ports through a single PCI-E 1X slot
  • Works with PCI-E 1X, 4X, 8X and 16X motherboard slots
  • Draws power directly from the PCI-E slot — no extra cable required
  • Compatible with Windows XP through Windows 11 plus Linux
  • Compact 4.5 by 2.7 inch card fits easily inside the case

Tæknilýsing

TypeAT

Spurningar um þessa vöru

What PCI-E slot width does the 1-to-6 adapter card require on the motherboard?

It fits a PCI-E 1X slot and is also compatible with 4X, 8X and 16X slots.

Which step in the supplied instructions is most often missed during installation?

The guide stresses plugging the floppy power cord into the card before seating it in the slot, and warns against reversing or offsetting the custom cable.

What component on the card may need cleaning or replacement after extended mining use?

The built-in IC heat radiator should be kept free of dust; if it becomes clogged or the thermal interface degrades, the radiator may need replacement.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.