Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
White and black braided PSU cable extension kit with 24-pin, CPU and GPU connectors, 30 cm length

myVolts

myVolts PSU Cable Extension Kit 24-Pin 4+4-Pin CPU 2x 6+2-Pin GPU 30cm WhiteBlack

SKU CH-0KF1-RYJ26

A 30cm sleeved extension kit adds one 24-pin ATX, one 4+4-pin CPU and two 6+2-pin GPU cables with 18AWG UL 1015 wire and cable combs in 17 colour options

  • TypeAT
  • 30 cm extensions fit compact builds without excess slack
  • 18 AWG UL 1015 tinned copper wires resist heat and humidity
  • High-density braided sleeve stays flexible for clean routing
  • Kit covers motherboard 24-pin CPU 4+4-pin and two GPU 6+2-pin connectors
  • 17 colour choices let the build match any theme

Extension Kit for ATX Builds

This set adds 30 cm sleeved extensions for a 24-pin ATX motherboard connector, one 4+4-pin CPU cable and two 6+2-pin GPU cables. It targets builders who want cleaner cable routing and a coordinated white-black look without replacing the power supply itself.

Thermals Noise and Power Draw

The 18AWG UL 1015 tinned copper conductors handle normal system currents while the high-density braid resists heat and humidity. As passive extensions they add no fan noise, draw no extra power and do not alter the unit's thermal behaviour.

Build Quality and Daily Use

Thick braided sleeves and included combs (three for 24-pin, nine for 8-pin) keep cables aligned during routing and hold trained curves after installation. The kit suits new CPU and GPU connectors; it does not serve builders who need longer 50 cm runs or additional peripheral extensions.

Helstu kostir

  • 30 cm extensions fit compact builds without excess slack
  • 18 AWG UL 1015 tinned copper wires resist heat and humidity
  • High-density braided sleeve stays flexible for clean routing
  • Kit covers motherboard 24-pin CPU 4+4-pin and two GPU 6+2-pin connectors
  • 17 colour choices let the build match any theme

Tæknilýsing

TypeAT

Spurningar um þessa vöru

How do I install the 24-pin motherboard extension and what step do people often miss?

Connect the 24-pin extension between your PSU cable and motherboard socket, then use the three included 24-pin combs to align all 24 wires; the step often missed is seating every pin fully before tightening the combs.

What maintenance or replacement will the 18AWG UL 1015 tinned copper cables need later?

The 18AWG UL 1015 tinned copper wires resist heat and humidity, so no scheduled replacement is needed; only inspect for physical damage if you re-route the 30cm extensions or swap components.

What limit appears first on the 30cm GPU extensions under sustained load?

The 30cm length adds minimal resistance, so the first limit is the 18AWG wire gauge itself, which is rated for the current your 6+2-pin GPU connectors draw.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.