Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

NEMIX RAM

NEMIX RAM 1.5TB DDR5 4800 CL40 16x96GB RDIMM ECC Registered Supermicro H14DSH memory upgrade

SKU CH-ZNPE-MMGES

1.5 TB DDR5-4800 ECC registered 16 × 96 GB kit for Supermicro H14DSH servers

  • Capacity1.5TB (16 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Speed 4800MHz

  • 5 TB total capacity from sixteen 96 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency delivers rated throughput on the H14DSH
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 10 V operation at 2Rx4 rank matches the board's memory-controller requirements
  • 288-pin RDIMM form factor fits the Supermicro H14DSH DIMM slots exactly

NEMIX RAM 1.5TB DDR5-4800 16x96GB RDIMM ECC Kit

This 1.5 terabyte kit contains sixteen 96GB DDR5-4800 Registered ECC RDIMMs. It runs at 1.1V with CL40 timing and a 2Rx4 organisation. The modules are built for the Supermicro H14DSH motherboard and its 288-pin slots.

Who this suits and who should look elsewhere

Server administrators filling every slot on a Supermicro H14DSH board with Registered ECC memory will match the board's population rules exactly. Builders needing unbuffered UDIMMs, SODIMM form factors, lower capacities, or different DDR generations cannot use this kit.

The specification that decides fit

The motherboard requires 288-pin DDR5 RDIMMs at 1.1V with CL40 latency and 2Rx4 ranking; this kit matches those electrical and mechanical parameters so the memory controller recognises the full 1.5TB at the rated 4800 MT/s.

Helstu kostir

  • 5 TB total capacity from sixteen 96 GB modules for maximum server density
  • DDR5 4800 speed with CL40 latency delivers rated throughput on the H14DSH
  • Registered ECC architecture offloads the controller and corrects single-bit errors
  • 10 V operation at 2Rx4 rank matches the board's memory-controller requirements
  • 288-pin RDIMM form factor fits the Supermicro H14DSH DIMM slots exactly

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K16
Capacity1.5TB (16 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.5TB 16X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does my Supermicro H14DSH motherboard need all 16 DIMM slots filled to run this 1.5TB kit?

The kit contains 16 modules of 96GB each; the H14DSH has 16 DDR5 RDIMM slots, so full capacity is reached when every slot is populated.

Can I keep my existing DDR5 RDIMMs and add this 16x96GB kit alongside them?

Mixing different capacities, ranks or speeds is not recommended; the board's memory controller expects identical 2Rx4 CL40 modules in every populated channel for stable operation.

How do I confirm the system sees the full 1.5TB at DDR5 4800 CL40 after installation?

Enter the BIOS or run a hardware inventory tool; it should report 1.5TB total, DDR5 4800 MT/s speed, CL40 latency, 1.1V voltage and ECC Registered status for all 16 DIMMs.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.