Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 128GB DDR5 5600 CL46 4Rx4 RDIMM memory upgrade

SKU CH-Q6VY-HZK4E

128GB DDR5 5600 ECC registered RDIMM with CL46 latency and 1.1V operation, validated for Supermicro X14SDW-40C-SP9F motherboards

  • Capacity128GB
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB

  • 128 GB capacity maximises server memory density
  • DDR5 5600 speed matches platform rated frequency
  • CL46 latency meets controller timing requirements
  • 4Rx4 registered ECC architecture enables full-slot population
  • 1 V operation aligns with motherboard voltage spec

Server DDR5 ECC RDIMM upgrade

This NEMIX RAM module adds 128 GB of DDR5 memory to compatible Supermicro platforms. It operates at 5600 MT/s with CL46 latency and a registered ECC design that protects data integrity. The 4Rx4 organisation and 1.1 V voltage match the board's native requirements.

Replaces slower or smaller DDR5 DIMMs

Swapping out lower-capacity or lower-speed DDR5 RDIMMs lets every populated slot run at the rated 5600 MT/s without downclocking. The jump is worthwhile when your workload needs the full 128 GB per module and the registered buffer to keep all channels stable at maximum population.

Suits Supermicro X14SDW-40C-SP9F builders

This kit fits administrators expanding that specific motherboard with validated DDR5 RDIMMs. It is not for systems that require UDIMM or SODIMM form factors, nor for boards that do not support 4Rx4 registered ECC modules at 1.1 V.

Helstu kostir

  • 128 GB capacity maximises server memory density
  • DDR5 5600 speed matches platform rated frequency
  • CL46 latency meets controller timing requirements
  • 4Rx4 registered ECC architecture enables full-slot population
  • 1 V operation aligns with motherboard voltage spec

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K1
Capacity128GB
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB DDR5 5600MHz PC5-44800 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 288-pin DDR5 RDIMM fit the Supermicro X14SDW-40C-SP9F motherboard?

Yes, the module uses the 288-pin DDR5 RDIMM form factor that the X14SDW-40C-SP9F requires; it is not a UDIMM or SODIMM.

What is the correct slot order when installing this 4Rx4 registered DIMM on the X14SDW-40C-SP9F?

Consult the motherboard manual for the approved DIMM population sequence; fully populated registered slots must follow the board's specific installation steps.

Does this 128GB kit require any firmware updates or ongoing maintenance after installation?

No firmware updates are needed for the memory itself; ECC corrects single-bit errors automatically, and the module carries a lifetime replacement warranty if a fault ever occurs.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.