Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green SODIMM sticks with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2400 CL17 SODIMM Kit for POSIFLEX RT-6016

SKU CH-WR8K-JRSNF

A 16 GB DDR4 SODIMM kit running at 2400 MHz with CL17 latency for the POSIFLEX RT-6016 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB kit boosts terminal responsiveness with two 8 GB modules
  • DDR4 2400 speed matches POSIFLEX RT-6016 specifications exactly
  • CL17 latency at 1.2 V keeps power draw low for continuous operation
  • 260-pin SODIMM form factor fits the slim terminal without adapters
  • Major OEM Samsung Micron Hynix chips deliver tested stability for point-of-sale workloads

16 GB DDR4 SODIMM kit for POSIFLEX RT-6016

This kit provides 16 GB of DDR4 memory in two 8 GB SODIMM modules for the POSIFLEX RT-6016 terminal. It runs at 2400 MT/s with CL17 latency at 1.20 V. The unbuffered, non-ECC design matches the system's slot requirements.

Installation is a standard SODIMM swap

The 260-pin modules insert directly into the terminal's memory slots without tools. No heat spreader is fitted, so clearance inside the slim chassis is not affected. The only common issue is seating the modules fully until the retention clips click; a loose fit will prevent the system from posting.

DDR4 2400 limits bandwidth to PC4-19200

The DDR4 2400 interface caps throughput at the PC4-19200 rate, so workloads that need higher memory bandwidth will not benefit from faster modules. The terminal's chipset and firmware determine the maximum supported capacity and speed; this kit cannot exceed those limits.

Helstu kostir

  • 16 GB kit boosts terminal responsiveness with two 8 GB modules
  • DDR4 2400 speed matches POSIFLEX RT-6016 specifications exactly
  • CL17 latency at 1.2 V keeps power draw low for continuous operation
  • 260-pin SODIMM form factor fits the slim terminal without adapters
  • Major OEM Samsung Micron Hynix chips deliver tested stability for point-of-sale workloads

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

Spurningar um þessa vöru

How can I confirm the kit is running at DDR4 2400 CL17 after installing it in my POSIFLEX RT-6016?

Enter the system BIOS or use a utility such as CPU-Z; the memory tab should report 2400 MT/s and CAS latency 17 for each 8 GB module.

What exactly ships in the box and do I need any extra parts for the POSIFLEX RT-6016?

The package contains two 8 GB 260-pin DDR4 SODIMM sticks (16 GB total); no additional brackets, cables or tools are required for the RT-6016.

Should I choose this 16 GB kit or look for a different capacity for the POSIFLEX RT-6016?

This 16 GB (2×8 GB) kit matches the DDR4 2400 CL17 1.2 V specification validated for the RT-6016; select it if your workload needs 16 GB, otherwise choose a kit with the same speed, latency and voltage in the capacity your terminal supports.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.