Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR4 SODIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM 16GB (2x8GB) DDR4 2666 CL19 SODIMM Kit for POSIFLEX XT-7315

SKU CH-KWCD-362PM

A 16 GB DDR4 SODIMM kit with two 8 GB modules at 2666 MHz CL19, validated for the POSIFLEX XT-7315 terminal

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 2666 CL19 timing matches POSIFLEX XT-7315 specs
  • 20V low-voltage modules reduce power draw
  • 260-pin SODIMM form factor fits JIVA Foldable 15 slot
  • Major OEM Samsung, Micron, Hynix chips ensure stability

POSIFLEX XT-7315 Memory Kit

This 16 GB DDR4 SODIMM kit is built for the POSIFLEX XT-7315 JIVA foldable 15-inch terminal. It contains two 8 GB modules that install directly into the system's memory slots. The kit targets IT technicians and POS administrators who need a reliable capacity upgrade for point-of-sale workloads.

DDR4 2666 CL19 Specification

The modules run at DDR4 2666 (PC4-21300) with a CAS latency of 19 and operate at 1.2 V. They are 260-pin unbuffered non-ECC SODIMMs organised as 2Rx8 using major OEM chips. This exact speed, voltage and pin count must match the terminal's requirements for the upgrade to function.

Suited for POSIFLEX Terminals Only

Buyers who need memory for any other laptop, desktop, server or kiosk model should look elsewhere because this kit is validated solely for the POSIFLEX XT-7315 platform. It is also not for systems that require ECC, registered modules, a different DDR generation or a different pin layout.

Helstu kostir

  • 16GB dual-channel kit boosts POS terminal responsiveness
  • DDR4 2666 CL19 timing matches POSIFLEX XT-7315 specs
  • 20V low-voltage modules reduce power draw
  • 260-pin SODIMM form factor fits JIVA Foldable 15 slot
  • Major OEM Samsung, Micron, Hynix chips ensure stability

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2666MHZ Non-ECC Unbuffered SODIMM
Part NumberMS21300-828K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL19
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 2Rx8 1.2V CL19 260-PIN Non-ECC Unbuffered SODIMM KIT

Spurningar um þessa vöru

What does the CL19 CAS latency mean for day-to-day use in the POSIFLEX XT-7315?

CL19 indicates the delay between a read command and data delivery; at 2666 MT/s the terminal will see standard DDR4 responsiveness for point-of-sale workloads.

How does the PC4-21300 rating affect real-world throughput?

PC4-21300 reflects the 2666 MT/s DDR4 interface, so the kit runs at the terminal's native memory speed without down-clocking.

Will the 260-pin SODIMM modules fit the XT-7315's memory slots?

Yes, the kit uses 260-pin DDR4 SODIMM form factor, which matches the slot type used in the POSIFLEX XT-7315 terminal.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.