Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR4 SODIMM sticks with gold contacts, no heat spreaders, 260 pins each

NEMIX RAM

NEMIX RAM 16GB DDR4 2666 ECC SODIMM Kit Synology RS822RP+

SKU CH-YNAV-F7WHX

A 16 GB DDR4 2666 ECC SODIMM kit with two 8 GB modules for Synology RS822RP+ NAS

  • Capacity16GB (2 x 8GB)
  • SpeedDDR4 2666 (PC4 21300)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • ECC protection prevents data corruption in Synology RS822RP+
  • 16 GB kit (2 × 8 GB) expands NAS capacity
  • DDR4 2666 CL19 at 1.2 V runs cool
  • Unbuffered 260-pin SODIMM fits Synology slot directly
  • Major-brand Samsung, Micron or Hynix chips ensure stability

Synology RS822RP+ compatible DDR4 ECC SODIMM kit

This 16GB kit contains two 8GB DDR4 2666 unbuffered ECC SODIMM modules built for the Synology RS822RP+ NAS. The kit targets administrators who need validated memory for that specific rackstation and want error-correcting code protection for data integrity.

16GB dual-channel capacity with CL19 latency

The 2 x 8GB configuration fills two slots and runs at 1.20V with CL19 timings, delivering 16GB of ECC-protected memory for typical NAS workloads such as file serving, backup and virtualization. Systems requiring more than 16GB or higher frequencies will exceed this kit's capacity and speed limits.

DDR4 2666 SODIMM interface constraints

The modules use the 260-pin DDR4 SODIMM form factor at 2666 MT/s, so they only fit platforms that accept unbuffered DDR4 ECC SODIMMs at that speed. Boards limited to slower DDR4 speeds, registered DIMMs, or non-ECC memory cannot use this kit.

Helstu kostir

  • ECC protection prevents data corruption in Synology RS822RP+
  • 16 GB kit (2 × 8 GB) expands NAS capacity
  • DDR4 2666 CL19 at 1.2 V runs cool
  • Unbuffered 260-pin SODIMM fits Synology slot directly
  • Major-brand Samsung, Micron or Hynix chips ensure stability

Tæknilýsing

BrandNEMIX RAM
SeriesSynology Compatible Series NAS Memory
ModelSynology DDR4 2666MHZ ECC Unbuffered SODIMM
Part NumberMSE21300-818K2
Capacity16GB (2 x 8GB)
SpeedDDR4 2666 (PC4 21300)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSynology
CAS LatencyCL19
Heat SpreaderNo
Type260-PIN DDR4 ECC SODIMM
Rank1Rx8
FeaturesDDR4 ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (2X8GB) DDR4 2666MHZ PC4-21300 1Rx8 1.2V CL19 260-PIN ECC Unbuffered SODIMM KIT

Spurningar um þessa vöru

Will this kit run at 2666 MHz alongside the original 8 GB module already in my RS822RP+?

The kit is rated DDR4 2666 (PC4-21300) CL19 1.20 V; the NAS will clock all installed modules to the lowest common speed, so the original module and the new 2 x 8 GB sticks will run together at 2666 MHz.

How can I confirm the RS822RP+ recognises the full 16 GB and ECC function after install?

Power on the unit, open Control Panel > Info Center, and verify Total Physical Memory shows 16 GB with ECC Status reported as Enabled.

What exactly ships in the box and is anything else required to fit the modules?

The package contains two 8 GB 260-pin DDR4 ECC unbuffered SODIMMs; no extra parts or tools are included, and the NAS chassis provides the only hardware needed for installation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.