Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board SODIMM module with black memory chips and gold edge connectors

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 1.2V 2Rx8 260-Pin SODIMM POSIFLEX TK-3250 Paragon Series memory upgrade

SKU CH-K8B8-SYQ1K

16 GB DDR4 3200 CL22 SODIMM for POSIFLEX TK-3250 Paragon Series kiosks

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 SODIMM for POSIFLEX TK-3250 kiosk
  • 3200 MHz PC4-25600 speed for responsive operation
  • CL22 latency at 1.2 V for efficient power use
  • 2Rx8 260-pin unbuffered non-ECC module design
  • Built with Samsung, Micron or Hynix chipset components

POSIFLEX TK-3250 Paragon Series memory upgrade

This 16 GB DDR4 SODIMM is built for the POSIFLEX TK-3250 Paragon Series kiosk. It runs at 3200 MHz with CL22 latency and 1.2 V operation. The module targets businesses refreshing point-of-sale terminals that require a single 16 GB stick.

Tool-free slot access on most kiosks

Installation typically takes minutes by opening the memory door and seating the 260-pin module until the clips lock. The unbuffered, non-ECC design means no BIOS configuration is needed. The usual issue is inserting the stick at an angle instead of straight down, which prevents the clips from engaging.

Verify single-slot capacity limit

Confirm the kiosk accepts a 16 GB 2Rx8 module in one slot; some revisions cap individual slots at 8 GB. Check that the system ships with DDR4 SODIMM slots and not an older generation. Ensure the existing memory voltage is 1.2 V to match this stick.

Helstu kostir

  • 16 GB DDR4 SODIMM for POSIFLEX TK-3250 kiosk
  • 3200 MHz PC4-25600 speed for responsive operation
  • CL22 latency at 1.2 V for efficient power use
  • 2Rx8 260-pin unbuffered non-ECC module design
  • Built with Samsung, Micron or Hynix chipset components

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Spurningar um þessa vöru

How can I verify the module is running at 3200 MT/s and CL22 after installing it in the POSIFLEX TK-3250?

Enter the system BIOS or UEFI and check the memory information screen; it should report DDR4 3200 (PC4-25600) with CAS latency 22 and 1.20 V.

What exactly is included in the package and do I need any extra parts for the upgrade?

The box contains one 16 GB 260-pin DDR4 SODIMM (part number MS25600-628K1); no additional components are required for installation.

Which capacity and rank option should I select for the TK-3250 Paragon Series kiosk?

Choose the 16 GB 2Rx8 module listed here, as it matches the system-specific configuration validated for this kiosk model.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.