Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green printed circuit board with black memory chips, gold edge connectors, no heat spreader

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 1Rx8 1.2V UDIMM memory upgrade

SKU CH-AFHT-FYR86

A 16 GB DDR4 3200 UDIMM with CL22 latency, 1.20 V operation and 288-pin unbuffered design for compatible desktop systems

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB capacity expands desktop memory headroom
  • DDR4 3200 MT/s speed supports responsive multitasking
  • CL22 latency balances timing with stability
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits standard desktop slots

16 GB DDR4 UDIMM for Kingston desktops

This 288-pin module delivers 16 GB of DDR4 3200 speed at CL22 latency and 1.20 V. It uses a single-rank 1Rx8 layout without ECC or a heat spreader. The stick is built with major-brand DRAM chips and tested for Kingston desktop compatibility.

Suits owners of Kingston PCs needing a single 16

Buyers who want ECC error correction or registered buffering should look elsewhere. Systems that require lower CAS latency or a multi-module kit will not match this specification. The absence of a heat spreader may limit sustained throughput in tightly packed chassis.

DDR4 3200 CL22 1.20 V 288-pin UDIMM

This combination of speed, voltage, timing and pin count determines whether the module fits the motherboard slot and meets the memory controller's requirements. Verify that the target system accepts non-ECC unbuffered DDR4 at 3200 MT/s before purchasing.

Helstu kostir

  • 16 GB capacity expands desktop memory headroom
  • DDR4 3200 MT/s speed supports responsive multitasking
  • CL22 latency balances timing with stability
  • 2 V operation reduces power draw and heat
  • 288-pin UDIMM form factor fits standard desktop slots

Tæknilýsing

BrandNEMIX RAM
SeriesKingston Desktop PC Compatible Series Memory
ModelKingston DDR4 3200MHZ Non-ECC Unbuffered UDIMM
Part NumberMD25600-618K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemKingston
CAS LatencyCL22
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank1Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 1Rx8 1.2V CL22 288-PIN Non-ECC Unbuffered UDIMM

Spurningar um þessa vöru

Should I choose the 16GB single module or look for a 2x8GB kit for my desktop?

This listing is a single 16GB stick. Adding one module is the simplest upgrade if you have a free slot; a matched kit is only needed when populating a multi-channel configuration from empty.

What does the DDR4 3200 CL22 rating actually deliver in a real system?

The module runs at 3200 MT/s with a CAS latency of 22 cycles at the standard 1.20 V, giving mainstream desktop bandwidth without requiring XMP or manual tuning.

The spec says 288-pin UDIMM — what does that limit in practice?

The 288-pin UDIMM form factor fits standard desktop DDR4 slots only; it will not fit laptop SO-DIMM sockets or server registered DIMM slots.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.