Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 16GB DDR4 3200 CL22 260-Pin SODIMM POSIFLEX ZT-3116E memory upgrade

SKU CH-5JJS-DKGNG

16GB DDR4 3200 CL22 SODIMM module built for the POSIFLEX ZT-3116E terminal

  • Capacity16GB
  • SpeedDDR4 3200 (PC4 25600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 16 GB DDR4 SODIMM expands POS terminal memory
  • 3200 MHz speed supports responsive transaction processing
  • CL22 latency maintains stable system operation
  • 2 V low-voltage design reduces power draw
  • 260-pin form factor fits POSIFLEX ZT-3116E slot

POS terminal memory upgrade

This 16 GB DDR4 SODIMM is built for the POSIFLEX ZT-3116E Haydn ZT series point-of-sale terminal. It delivers 3200 MHz speed at CL22 latency using a 260-pin unbuffered non-ECC design. The single-module layout suits systems with limited slot count.

Check slot count and voltage

Verify that the terminal accepts a single 260-pin DDR4 SODIMM running at 1.2 V. The module is 2Rx8 organised and non-ECC, so the platform must support unbuffered memory without error correction. Confirm the BIOS recognises PC4-25600 timing before ordering.

Fits the ZT-3116E motherboard directly

The stick installs in the existing SODIMM socket and requires no heat spreader or additional cooling. It frees the second slot for future expansion if the board provides one. The 1.2 V operation keeps power draw low for continuous POS workloads.

Helstu kostir

  • 16 GB DDR4 SODIMM expands POS terminal memory
  • 3200 MHz speed supports responsive transaction processing
  • CL22 latency maintains stable system operation
  • 2 V low-voltage design reduces power draw
  • 260-pin form factor fits POSIFLEX ZT-3116E slot

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 3200MHZ Non-ECC Unbuffered SODIMM
Part NumberMS25600-628K1
Capacity16GB
SpeedDDR4 3200 (PC4 25600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL22
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content16GB (1X16GB) DDR4 3200MHZ PC4-25600 2Rx8 1.2V CL22 260-PIN Non-ECC Unbuffered SODIMM

Spurningar um þessa vöru

What comes inside the package and is anything else needed for installation?

The box contains one 16GB 260-pin DDR4 SODIMM module rated at 3200 MT/s CL22 1.20V; no extra parts or tools are required beyond the POSIFLEX ZT-3116E service manual.

Why choose the single 16GB 3200 CL22 stick instead of a lower-capacity or faster-timing option?

This 16GB 2Rx8 module matches the ZT-3116E maximum supported speed and voltage, delivering the full 25600 MB/s bandwidth the platform allows without compatibility risk.

What does the 3200 MT/s rating mean once the module is installed in the ZT-3116E?

The system will run the memory at 3200 MT/s with CL22 latency at 1.20V, providing the peak 25600 MB/s throughput the POS terminal's memory controller supports.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.