Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

NEMIX RAM

NEMIX RAM 16GB DDR5 5600MHz CL46 ECC UDIMM Supermicro X14SAZ-F memory upgrade

SKU CH-BCG2-MWJP0

16 GB DDR5-5600 ECC UDIMM with CL46 timing and 1.1 V operation, validated for Supermicro X14SAZ-F motherboards

  • Capacity16GB
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 16 GB DDR5-5600 ECC UDIMM adds reliable capacity to your Supermicro X14SAZ-F
  • CL46 1.1 V timing matches the board's memory controller for full-speed operation
  • 1Rx8 unbuffered ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 288-pin UDIMM form factor fits the exact slot type required by the motherboard
  • Built with major OEM DRAM chips from Samsung, Micron or Hynix for consistent quality

Targeted DDR5 ECC upgrade

This 16 GB DDR5-5600 module is built specifically for the Supermicro X14SAZ-F motherboard. It delivers the exact 288-pin unbuffered ECC UDIMM form factor that the board requires.

Sustained error-correction stability

ECC circuitry detects and corrects single-bit errors continuously, preventing silent data corruption during long compute runs. The 1.1 V operating voltage and CL46 timing remain consistent under load without thermal throttling.

No-spreader UDIMM practicality

The bare 1Rx8 PCB fits tight DIMM slots without clearance issues. Single-rank organisation simplifies population rules, and the 288-pin keying prevents accidental insertion into incompatible sockets.

Helstu kostir

  • 16 GB DDR5-5600 ECC UDIMM adds reliable capacity to your Supermicro X14SAZ-F
  • CL46 1.1 V timing matches the board's memory controller for full-speed operation
  • 1Rx8 unbuffered ECC corrects single-bit errors on the fly to prevent silent data corruption
  • 288-pin UDIMM form factor fits the exact slot type required by the motherboard
  • Built with major OEM DRAM chips from Samsung, Micron or Hynix for consistent quality

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K1
Capacity16GB
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much heat and power does the 1.1V DDR5 ECC UDIMM draw when the Supermicro X14SAZ-F runs continuously?

The module operates at 1.1V with no heat spreader, so it relies on case airflow; DDR5 moves voltage regulation onto the DIMM, keeping system power draw predictable during all-day workloads.

What must the motherboard provide for this 288-pin 1Rx8 unbuffered ECC DIMM to function?

The Supermicro X14SAZ-F must support DDR5 5600 PC5-44800 unbuffered ECC UDIMMs in a 288-pin slot and follow its documented population order for 1Rx8 modules.

Will this CL46 5600MHz stick run at rated speed beside slower DDR5 modules already installed?

The board will clock all populated slots to the lowest common speed and latency; mixing slower DDR5 with this 5600MHz CL46 kit forces the faster module to downclock.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.