Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Eight green DDR5 RDIMM modules without heat spreaders in a kit box

NEMIX RAM

NEMIX RAM 1TB (8 x 128GB) DDR5 4800 CL40 1.1V 2Rx4 ECC Registered RDIMM Kit for Supermicro H13DSG-O-CPU-D

SKU CH-JDRD-DD846

1TB DDR5-4800 ECC Registered RDIMM kit (8 × 128GB, CL40, 1.1V, 2Rx4) validated for Supermicro H13DSG-O-CPU-D motherboards

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1TB 8X128GB

Sjá 30 stillingar til viðbótar
  • 1TB capacity across eight 128GB modules maximises server memory density
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for compute workloads
  • Registered ECC architecture corrects single-bit errors and buffers signals for full-slot stability
  • 1V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D without adapters

Exact-match 1 TB DDR5 kit

This NEMIX RAM kit delivers 1 TB of DDR5 4800 memory as eight 128 GB Registered ECC RDIMMs. It is built for the Supermicro H13DSG-O-CPU-D motherboard and matches the board's required rank, voltage and timing for full-capacity operation. System integrators and administrators upgrading that specific platform receive the precise module specification the memory controller expects.

Registered RDIMM build for full population

Each module uses a 288-pin Registered RDIMM form factor with on-die ECC and a 2Rx4 organisation. The registered architecture buffers address and command signals so every slot can be populated without loading the memory controller. No heat spreader is fitted, allowing the modules to sit in dense server chassis where airflow is managed by the system fans.

DDR5 4800 CL40 at 1.1 V

The kit runs at DDR5 4800 (PC5-38400) with a CAS latency of 40 at 1.1 V. This single speed-grade-and-voltage combination is what the target motherboard validates; boards that require a different DDR5 data rate or a lower CL value will not support this kit at its rated specification.

Helstu kostir

  • 1TB capacity across eight 128GB modules maximises server memory density
  • DDR5 4800 speed with CL40 latency delivers rated bandwidth for compute workloads
  • Registered ECC architecture corrects single-bit errors and buffers signals for full-slot stability
  • 1V operation matches the motherboard's memory-controller specification exactly
  • 288-pin RDIMM form factor fits the Supermicro H13DSG-O-CPU-D without adapters

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-724K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the DDR5 4800 interface run at its full 4800 MT/s when all eight slots are populated?

Yes, the registered DDR5 4800 modules are designed so the memory controller recognises the full 1 TB kit at the rated 4800 MT/s speed when every slot is filled.

Will these 288-pin RDIMMs fit the Supermicro H13DSG-O-CPU-D motherboard without clearance issues?

The 288-pin RDIMM form factor matches the board's DIMM slots exactly; no heat spreader is present, so standard server chassis clearance applies.

What is the correct population order for the eight 128 GB modules on this board?

Consult the Supermicro H13DSG-O-CPU-D manual for the approved DIMM population sequence before installing all eight modules.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.