Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR5 RDIMM modules, black chips, no heat spreader, 288-pin edge connectors

NEMIX RAM

NEMIX RAM 256GB (2x128GB) DDR5 5600 ECC RDIMM 4Rx4 CL46 1.1V

SKU CH-2WD5-67VP9

A 256 GB DDR5 registered ECC server memory kit with two 128 GB modules running at 5600 MT/s, CL46 latency and 1.1 V

  • Capacity256GB (2 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Capacity 256GB (2 x 128GB)

  • 256 GB total capacity from two 128 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC registered design protects data integrity
  • CL46 latency at 1.1 V operation
  • 288-pin RDIMM form factor fits server boards

256GB DDR5 ECC RDIMM kit

This 256GB kit contains two 128GB DDR5 5600 registered DIMMs with ECC and a 4Rx4 organisation. It is built for servers and workstations that require error-correcting memory and registered signal integrity. The modules operate at 1.1V with a CL46 latency. Buyers needing non-ECC or unbuffered memory for consumer platforms cannot use this kit.

Capacity and headroom at 5600 MT/s

The 256GB total capacity provides substantial headroom for virtualisation, in-memory databases and large dataset processing. Each 128GB module uses a 4Rx4 layout to reach this density at the DDR5 5600 (PC5-44800) speed rating. Workloads that exceed 256GB or demand higher frequencies than 5600 MT/s will require additional DIMM slots or faster memory beyond this specification.

Build integration with 288-pin RDIMM slots

Installation requires a motherboard with 288-pin DDR5 RDIMM slots that support registered ECC memory and the 4Rx4 rank configuration. The modules have no heat spreader, so airflow across the DIMMs must be managed by the chassis. This kit frees the builder from mixing capacities or ranks, delivering a matched pair validated for stability under load.

Helstu kostir

  • 256 GB total capacity from two 128 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • ECC registered design protects data integrity
  • CL46 latency at 1.1 V operation
  • 288-pin RDIMM form factor fits server boards

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-744K2
Capacity256GB (2 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR5 ECC Registered Server Memory Motherboard Compatible

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Can I mix these 288-pin DDR5 5600 RDIMMs with other DDR5 RDIMMs already in my server?

Mixing registered DDR5 modules requires matching speed, voltage and rank configuration; these run at 5600 MT/s, 1.1 V and 4Rx4, so any existing DDR5 RDIMMs must share those specifications.

How can I confirm the kit is running at DDR5 5600 CL46 after installation?

Check the BIOS or a tool such as CPU-Z; you should see each 128 GB module reported at 5600 MT/s with CAS latency 46 and voltage at 1.1 V.

What comes in the MR44800-744K2 box and what must I source separately?

The box contains two 128 GB DDR5 5600 ECC registered RDIMMs (256 GB total); no heat spreaders or cables are included, and a compatible DDR5 RDIMM motherboard is required.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.