Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green rectangular DDR3 UDIMM module with black chips and gold contacts, no heat spreader

NEMIX RAM

NEMIX RAM 2GB DDR3 1333 PC3-10600 1.5V 240-Pin UDIMM

SKU CH-HYVN-STEQS

A 2 GB DDR3 desktop module running at 1333 MT/s with CL9 latency and 1.5 V operation

  • Capacity2GB
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 2GB

  • 2GB DDR3 1333 capacity speeds up desktop workloads
  • CL9 latency at 1.5V keeps system response snappy
  • 240-pin UDIMM fits standard desktop motherboards
  • Major OEM Samsung, Micron, Hynix chips ensure reliable operation
  • Non-ECC unbuffered design simplifies memory upgrades

2GB DDR3 desktop module

This 2GB DDR3 UDIMM is built for older desktop motherboards that accept 240-pin unbuffered memory. It suits office PCs, basic workstations or legacy systems needing a modest capacity boost.

Straightforward slot insertion

Align the notch with the motherboard key and press firmly until the retention clips click; the module is unbuffered and non-ECC so it works in standard consumer boards. Errors usually come from mixing speeds or exceeding the board’s maximum supported capacity.

1333 MT/s PC3-10600 speed rating

The module runs at DDR3 1333 (PC3-10600) with CL9 latency at 1.5 V, and this speed grade is the single figure that determines whether the memory matches the motherboard’s supported specification.

Helstu kostir

  • 2GB DDR3 1333 capacity speeds up desktop workloads
  • CL9 latency at 1.5V keeps system response snappy
  • 240-pin UDIMM fits standard desktop motherboards
  • Major OEM Samsung, Micron, Hynix chips ensure reliable operation
  • Non-ECC unbuffered design simplifies memory upgrades

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-228K1
Capacity2GB
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I verify the module is running at 1333 MHz with CL9 after installation?

Open the BIOS or a tool such as CPU-Z and confirm the memory frequency shows 1333 MHz and the timings read 9-9-9-24 at 1.50 V.

What ships in the box and do I need any extra parts?

The package contains one 2 GB 240-pin DDR3 UDIMM; no cables, brackets or additional components are required for a standard desktop DIMM slot.

Which version should I choose if my board only supports 1.5 V DDR3?

This module is a 1.5 V PC3-10600 CL9 UDIMM, matching boards that specify 1.5 V DDR3 1333 non-ECC memory.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.