Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green SODIMM sticks, black chips, no heat spreader

NEMIX RAM

NEMIX RAM 32GB (2×16GB) DDR4 2400 CL17 SODIMM kit for POSIFLEX XT-6315

SKU CH-TZEX-CXM0S

A 32 GB DDR4 SODIMM kit running at 2400 MHz with CL17 latency for the POSIFLEX XT-6315 terminal

  • Capacity32GB (2 x 16GB)
  • SpeedDDR4 2400 (PC4 19200)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 32 GB total capacity from two 16 GB modules
  • DDR4 2400 speed with PC4-19200 bandwidth
  • CL17 latency at 1.20 V for stable operation
  • 260-pin SODIMM form factor fits POSIFLEX XT-6315
  • Tested with major OEM Samsung, Micron, Hynix chips

POSIFLEX XT-6315 DDR4 SODIMM kit

This 32 GB kit contains two 16 GB DDR4 2400 CL17 modules built for the POSIFLEX XT-6315 JIVA fanless POS terminal. It targets technicians who need to maximise memory capacity on that specific platform without changing voltage or form factor.

260-pin SODIMM installation notes

The modules are standard 260-pin unbuffered non-ECC SODIMMs that slot into the terminal's memory sockets. Because the XT-6315 is a fanless sealed unit, accessing the slots may require removing a service panel; verify the manual first. The 1.20 V operating voltage matches the platform spec, so no BIOS voltage adjustment is needed.

32 GB capacity and headroom

Two ranks per module (2Rx8) give the memory controller full density at DDR4 2400 speeds. The kit fills both slots for the maximum 32 GB the terminal accepts, eliminating swap traffic in multi-application retail workloads. Systems that require ECC or registered memory cannot use this kit, and boards limited to 16 GB total will not recognise the full capacity.

Helstu kostir

  • 32 GB total capacity from two 16 GB modules
  • DDR4 2400 speed with PC4-19200 bandwidth
  • CL17 latency at 1.20 V for stable operation
  • 260-pin SODIMM form factor fits POSIFLEX XT-6315
  • Tested with major OEM Samsung, Micron, Hynix chips

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2400MHZ Non-ECC Unbuffered SODIMM
Part NumberMS19200-628K2
Capacity32GB (2 x 16GB)
SpeedDDR4 2400 (PC4 19200)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL17
Heat SpreaderNo
Type260-PIN DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content32GB (2X16GB) DDR4 2400MHZ PC4-19200 2Rx8 1.2V CL17 260-PIN Non-ECC Unbuffered SODIMM KIT

Spurningar um þessa vöru

How can I confirm the 32GB DDR4 2400 kit is running correctly after installing it in my POSIFLEX XT-6315?

The system BIOS or OS memory info should show 32GB total at 2400MHz with CL17 timings and 1.20V operation.

What exactly comes in the box with the MS19200-628K2 kit, and do I need any extra parts for the XT-6315?

The package includes two 16GB 260-PIN DDR4 SODIMM modules; no additional components are required for installation.

Why choose this 32GB (2×16GB) CL17 kit over a different capacity or speed for the POSIFLEX XT-6315?

This kit matches the terminal's DDR4 2400 PC4-19200 specification with 2Rx8 organisation and 1.2V voltage for guaranteed compatibility.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.