Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR3 UDIMM sticks in a kit

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR3 1333 PC3-10600 1.35V 240-Pin UDIMM desktop RAM

SKU CH-VPMM-1Q8FW

Four 8 GB DDR3 1333 modules deliver 32 GB at 1.35 V or 1.50 V for desktop upgrades

  • Capacity32GB (4 x 8GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 32GB (4 x 8GB)

  • 32GB kit expands multitasking headroom with four 8GB modules
  • DDR3 1333 PC3-10600 speed matches legacy platform specs
  • 35V low-voltage operation reduces power draw and heat
  • 240-pin UDIMM form factor fits standard desktop DIMM slots
  • CL9 latency and unbuffered design suit non-ECC consumer boards

NEMIX RAM 32GB DDR3 Desktop Memory Kit

This NEMIX RAM kit provides 32GB of desktop memory across four 8GB modules. It uses 240-pin DDR3 UDIMM form factor and runs at 1333 speed with PC3-10600 rating. The modules are non-ECC and unbuffered for standard desktop motherboard compatibility. CAS latency is rated at CL9 for stable operation.

Suits Standard DDR3 Desktop Upgrades

This kit suits users upgrading older desktop platforms that accept 240-pin DDR3 memory at 1333 speed. It is not for systems that require registered or ECC modules. Builders needing higher frequencies or lower latency timings should look at other specifications. The four-module layout fills four DIMM slots on typical consumer boards.

Voltage Specified at 1.50 Volts

The modules operate at a tested voltage of 1.50V as listed in the specifications. Buyers must confirm their motherboard supports this voltage level before purchase. Some platforms may require different voltage settings for stability. Checking the system manual ensures the correct electrical match.

Helstu kostir

  • 32GB kit expands multitasking headroom with four 8GB modules
  • DDR3 1333 PC3-10600 speed matches legacy platform specs
  • 35V low-voltage operation reduces power draw and heat
  • 240-pin UDIMM form factor fits standard desktop DIMM slots
  • CL9 latency and unbuffered design suit non-ECC consumer boards

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-828LK4
Capacity32GB (4 x 8GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 240-pin DDR3 UDIMM modules need any thermal paste or heat-spreader replacement over time?

The kit ships without heat spreaders and runs at the standard 1.50 V JEDEC voltage; no thermal paste or spreader maintenance is required for the life of the modules.

What is the first limit reached when the 4 x 8 GB kit runs at DDR3 1333 continuously?

The 32 GB total capacity ceiling is reached before any bandwidth or latency bottleneck appears at the rated 1333 MT/s speed.

How much heat and power does the 1.50 V DDR3 1333 kit produce during all-day operation?

Each 8 GB module draws the standard DDR3 1.50 V supply; with no heat spreaders the modules run at normal JEDEC thermal limits and produce no audible noise.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.