Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR5 UDIMM sticks without heat spreaders in a 32GB kit

NEMIX RAM

NEMIX RAM 32GB (4x8GB) DDR5 5600 CL46 1.1V UDIMM for Supermicro X13SAE-F

SKU CH-XGDS-33PMT

A 32 GB DDR5 kit of four 8 GB UDIMMs running at 5600 MT/s with CL46 timing and 1.1 V, built from major OEM chips and validated for the Supermicro X13SAE-F motherboard

  • Capacity32GB (4 x 8GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 4X8GB

  • 32 GB kit lets your Supermicro X13SAE-F run at full DDR5-5600 speed
  • CL46 timing and 1.10 V match the board's memory controller exactly
  • 1Rx8 unbuffered UDIMM form factor fits the required 288-pin slots
  • Major OEM Samsung, Micron or Hynix chips tested for stability at rated specs
  • Lifetime replacement warranty and free US-based technical support included

Exact-match DDR5-5600 kit for Supermicro X13SAE-F

This 32 GB kit (4 × 8 GB) is built to the precise DDR5-5600 (PC5-44800) specification the Supermicro X13SAE-F motherboard expects. It uses 288-pin unbuffered UDIMMs with 1Rx8 rank, 1.1 V operation and CL46 timing so the memory controller recognises full capacity at rated speed without manual tuning.

32 GB capacity with standard DDR5 headroom

Four single-rank modules give 32 GB of non-ECC memory, suitable for general desktop workloads, multitasking and light content creation. The CL46 latency and 1.1 V voltage are the JEDEC baseline for DDR5-5600, so bandwidth scales predictably; workloads needing ECC error correction, registered buffering or speeds beyond 5600 MT/s will require different modules.

Replaces mismatched or lower-speed DDR5 sticks

If the system currently runs slower DDR5, mixed-capacity DIMMs or empty slots, this kit restores the board's validated population rules and rated throughput. The upgrade is worthwhile when the platform supports DDR5-5600 natively and the user wants a tested, major-OEM chip kit backed by lifetime replacement support; it does not add ECC, registered buffering or higher frequencies.

Helstu kostir

  • 32 GB kit lets your Supermicro X13SAE-F run at full DDR5-5600 speed
  • CL46 timing and 1.10 V match the board's memory controller exactly
  • 1Rx8 unbuffered UDIMM form factor fits the required 288-pin slots
  • Major OEM Samsung, Micron or Hynix chips tested for stability at rated specs
  • Lifetime replacement warranty and free US-based technical support included

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-818K4
Capacity32GB (4 x 8GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 4X8GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 5600 MHz DDR5 kit run at its rated speed on my Supermicro X13SAE-F without manual BIOS tuning?

The kit is spec-matched to the X13SAE-F memory controller and population rules, so the board should recognise the 5600 MT/s, CL46, 1.1 V profile automatically.

How can I verify the four 8 GB modules are operating as a 32 GB quad-channel set after installation?

Check the BIOS memory information screen or OS task manager — it should report 32 GB total at DDR5-5600 with 1Rx8 organisation across all four 288-pin slots.

Does the MD44800-818K4 package include only the four UDIMMs or are any cables or tools supplied?

The box contains the four 8 GB DDR5 UDIMM modules only; no cables, screws or installation tools are included.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.