Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board DDR5 memory module with black chips, no heat spreader, 288 pins

NEMIX RAM

NEMIX RAM 32GB DDR5 4800 CL40 ECC UDIMM SuperMicro memory upgrade

SKU CH-52B3-YR2EJ

32 GB DDR5 ECC UDIMM running at 4800 MT/s with CL40 latency and 1.1 V operation

  • Capacity32GB
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 32GB capacity expands server memory headroom
  • DDR5 4800 speed delivers high data throughput
  • ECC protection detects and corrects memory errors
  • 1V operation reduces power draw per module
  • Supermicro validated compatibility ensures reliable integration

32GB DDR5 4800 ECC UDIMM for SuperMicro

This is a 32GB DDR5 4800 CL40 ECC unbuffered UDIMM built for SuperMicro servers and workstations. The single-rank 2Rx8 module runs at 1.10V and uses major OEM chips from Samsung, Micron or Hynix. It carries the SuperMicro MEM-DR532L-CL01-EU48 compatibility listing and installs in a standard 288-pin DDR5 slot. No heat spreader is fitted.

Suits SuperMicro DDR5 platforms needing ECC

IT teams maintaining SuperMicro systems that require DDR5 ECC unbuffered memory at 4800 MT/s will find this module validated for those boards. Builders using consumer motherboards, registered DIMM slots, or non-ECC platforms should look elsewhere because the pinout, signalling and error-correction behaviour differ. The lack of a heat spreader also means it is not aimed at heavily overclocked enthusiast builds.

Check your board accepts DDR5 ECC UDIMM

Before ordering, confirm the motherboard manual lists DDR5 4800 ECC unbuffered UDIMM support and that the CPU memory controller is rated for 1.10V operation. Verify the slot count and maximum capacity per channel so the single 32GB module fits the planned configuration. Ensure the BIOS version in use recognises 2Rx8 density modules without requiring a microcode update.

Helstu kostir

  • 32GB capacity expands server memory headroom
  • DDR5 4800 speed delivers high data throughput
  • ECC protection detects and corrects memory errors
  • 1V operation reduces power draw per module
  • Supermicro validated compatibility ensures reliable integration

Tæknilýsing

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR5 4800MHZ ECC Unbuffered UDIMM
Part NumberME38400-328K1
Capacity32GB
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 ECC UDIMM
Rank2Rx8
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB (1X32GB) DDR5 4800MHZ PC5-38400 2Rx8 1.1V CL40 288-PIN ECC Unbuffered UDIMM

Spurningar um þessa vöru

Does my Supermicro motherboard need 288-pin DDR5 ECC UDIMM slots to accept this 32 GB module?

Yes — the stick is a 288-pin DDR5 ECC UDIMM, so the board must provide DDR5 UDIMM sockets that support ECC.

Can I keep my existing DDR5 4800 CL40 ECC UDIMMs and add this 2Rx8 32 GB module alongside them?

It will work if the motherboard accepts mixed ranks and the total capacity stays within the board's limit; match speed, voltage and ECC type for best stability.

How do I confirm the module is running at 4800 MT/s with CL40 after installation?

Check the BIOS memory information or a tool such as CPU-Z — it should report DDR5-4800, 1.1 V, CL40 and ECC active.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.