Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green 288-pin DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 384GB (4x96GB) DDR5 6400 CL52 2Rx4 1.1V ECC Registered RDIMM memory upgrade for GIGABYTE MS34-CP0

SKU CH-V8HE-VASZZ

A 384 GB DDR5-6400 ECC registered RDIMM kit of four 96 GB modules at CL52 and 1.1 V, validated for the Gigabyte MS34-CP0 motherboard

  • Capacity384GB (4 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 384GB 4X96GB

Sjá 18 stillingar til viðbótar
  • 384 GB total capacity lets you fully populate four slots with 96 GB modules
  • DDR5 6400 speed matches the board's rated frequency for maximum throughput
  • CL52 latency and 1.1 V operation meet the controller's exact timing and power requirements
  • Registered ECC with 2Rx4 organisation offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor is the precise physical and electrical match for the GIGABYTE MS34-CP0

384GB DDR5 RDIMM kit for GIGABYTE MS34-CP0

This 384GB kit contains four 96GB DDR5 6400 registered ECC RDIMMs built for the GIGABYTE MS34-CP0 motherboard. The modules run at 1.10V with CL52 latency and a 2Rx4 rank structure. Enterprise servers needing maximum registered memory capacity per slot are the target workload.

Registered ECC RDIMM form factor

The single specification that decides fitment is the 288-pin registered ECC RDIMM form factor required by the MS34-CP0. UDIMM or SODIMM modules will not seat in this board and the memory controller expects registered signalling. Population rules in the motherboard manual must be followed for full 384GB recognition.

Four-module kit with major OEM chips

The package delivers four matched 96GB modules sourced from major OEM Samsung, Micron or Hynix dies. No heat spreaders are included so airflow clearance matches the server chassis design. Buyers who need fewer than four DIMMs or a non-registered UDIMM layout cannot use this kit.

Helstu kostir

  • 384 GB total capacity lets you fully populate four slots with 96 GB modules
  • DDR5 6400 speed matches the board's rated frequency for maximum throughput
  • CL52 latency and 1.1 V operation meet the controller's exact timing and power requirements
  • Registered ECC with 2Rx4 organisation offloads the controller and corrects single-bit errors on the fly
  • 288-pin RDIMM form factor is the precise physical and electrical match for the GIGABYTE MS34-CP0

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-9624K4
Capacity384GB (4 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 4X96GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What does the 6400 speed rating mean once the four 96 GB modules are installed in the MS34-CP0?

The kit runs at DDR5-6400 with CL52 latency at 1.1 V, so the memory controller sees the rated frequency and timings across all four slots when populated per the board's rules.

How does the PC5-51200 designation relate to the MS34-CP0's memory interface?

PC5-51200 is the DDR5-6400 module standard; the MS34-CP0's DDR5 controller negotiates that speed and the registered buffer lets every slot run fully populated.

What physical requirements must the MS34-CP0 meet to accept these 288-pin RDIMMs?

The board needs DDR5 RDIMM slots supporting 2Rx4 registered modules at 1.1 V, with a population order that allows four 96 GB DIMMs for the full 384 GB capacity.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.