Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Eight green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM 384GB 8x48GB DDR5 5600 CL46 2Rx8 1.1V ECC RDIMM Supermicro H14SSL-N memory upgrade

SKU CH-GTH6-MGCZT

Eight-module 384 GB DDR5 kit with ECC registered RDIMMs at 5600 MT/s, CL46, 1.1 V, validated for Supermicro H14SSL-N servers

  • Capacity384GB (8 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 384GB 8X48GB

Sjá 24 stillingar til viðbótar
  • 384 GB total capacity from eight 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput out of the box
  • Registered ECC RDIMM architecture corrects single-bit errors and supports full population
  • 10 V operation matches the Supermicro H14SSL-N memory controller specification exactly
  • 288-pin 2Rx8 form factor fits the board's required DIMM slots without adapters

384GB DDR5 ECC RDIMM kit for Supermicro H14SSL-N

This 384GB kit contains eight 48GB DDR5 5600 PC5-44800 registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14SSL-N memory controller expects. It is intended for administrators who need the maximum supported capacity on this specific motherboard without manual tuning.

Upgrade from partial or mixed-capacity

Replacing a partially populated or mixed-rank layout with this matched 8x48GB kit removes population-rule conflicts and lets every slot run at the rated 5600 speed. The jump is worth it when the workload demands full-channel bandwidth and the board’s qualified-vendor list calls for 2Rx8 registered modules at 1.1V CL46.

384GB capacity with registered ECC headroom

Eight 2Rx8 modules deliver 384GB of addressable memory while the registered architecture offloads the controller so all slots stay stable at full population. ECC corrects single-bit errors on the fly, protecting data integrity in production workloads. The kit stops at the motherboard’s supported limit; systems requiring more memory or a different form factor cannot use this kit.

Helstu kostir

  • 384 GB total capacity from eight 48 GB modules for maximum server density
  • DDR5 5600 speed with CL46 latency delivers rated throughput out of the box
  • Registered ECC RDIMM architecture corrects single-bit errors and supports full population
  • 10 V operation matches the Supermicro H14SSL-N memory controller specification exactly
  • 288-pin 2Rx8 form factor fits the board's required DIMM slots without adapters

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K8
Capacity384GB (8 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content384GB 8X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the 288-pin DDR5 RDIMM form factor match the Supermicro H14SSL-N motherboard slots?

Yes, the kit uses 288-pin DDR5 RDIMM modules, which is the exact form factor the Supermicro H14SSL-N motherboard requires for its memory slots.

What is the correct DIMM population order for installing all eight 48GB modules on the Supermicro H14SSL-N?

Install the eight modules following the motherboard manual's specified population sequence; the board's memory controller expects a precise slot order to recognise the full 384GB capacity at DDR5-5600 speed.

Will the registered ECC design and 1.1V operation require any firmware updates or special cooling over time?

The registered ECC architecture and standard 1.1V DDR5 voltage run within the motherboard's specifications; no firmware updates or additional cooling are needed for normal operation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.