Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board SODIMM module with black memory chips and gold edge connector

NEMIX RAM

NEMIX RAM 4GB DDR3 1333 PC3-10600 1.35V 204-Pin SODIMM POSIFLEX HC-1521IR memory upgrade

SKU CH-GPYG-PJKCB

A 4 GB DDR3 SODIMM running at 1333 MHz with 1.35 V low-voltage operation for the POSIFLEX HC-1521IR terminal

  • Capacity4GB
  • SpeedDDR3 1333 (PC3 10600)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.50V
  • Designed for POSIFLEX HC-1521IR terminal compatibility
  • DDR3 1333 speed for responsive system performance
  • 35V low voltage reduces power consumption
  • 4GB capacity handles multitasking workloads
  • 204-pin SODIMM fits laptop-style memory slots

POSIFLEX HC-1521IR memory upgrade

This 4 GB DDR3 SODIMM is built for the POSIFLEX HC-1521IR touch-screen terminal. It installs in the single 204-pin slot to raise system memory for point-of-sale or kiosk workloads. The module is validated for that specific platform.

Low-voltage DDR3 operation

Rated at 1.35 V with a 1.50 V fallback, the stick draws minimal power inside the sealed terminal chassis. Unbuffered non-ECC design keeps latency at CL9 while running at 1333 MT/s. No heat spreader is fitted, matching the original thermal envelope.

Single-module simplicity

The package contains one 2Rx8 SODIMM and no extra cables, adapters or software. Installation follows the terminal's own service guide. Lifetime replacement backing covers the memory itself.

Helstu kostir

  • Designed for POSIFLEX HC-1521IR terminal compatibility
  • DDR3 1333 speed for responsive system performance
  • 35V low voltage reduces power consumption
  • 4GB capacity handles multitasking workloads
  • 204-pin SODIMM fits laptop-style memory slots

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR3 1333MHZ Non-ECC Unbuffered SODIMM
Part NumberMS10600-428K1
Capacity4GB
SpeedDDR3 1333 (PC3 10600)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.50V
Compatible SystemPOSIFLEX POS
CAS LatencyCL9
Heat SpreaderNo
Type204-Pin DDR3 SODIMM
Rank2Rx8
FeaturesDDR3 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content4GB (1X4GB) DDR3 1333MHZ PC3-10600 2Rx8 1.35V 204-PIN Non-ECC Unbuffered SODIMM

Spurningar um þessa vöru

How do I install the 204-pin SODIMM in the POSIFLEX HC-1521IR, and what step is often missed?

Power off the terminal, open the memory access panel, align the notch on the 204-pin DDR3 SODIMM with the slot key, press firmly until the side clips click, then verify 4GB appears in BIOS before closing the case.

Will the 1.35V DDR3 1333 module need replacement or firmware updates during its service life?

The MS10600-428K1 module has no firmware and no moving parts; it only requires replacement if a memory diagnostic reports errors or the terminal's workload exceeds the single 4GB capacity.

What limit appears first when the POS terminal runs sustained workloads with this CL9 2Rx8 kit?

The 4GB capacity ceiling is reached before bandwidth or thermal limits, causing the OS to swap to storage and slowing transaction processing during peak periods.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.