Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

NEMIX RAM

NEMIX RAM 512GB 16x32GB DDR5 5600 CL46 ECC RDIMM Supermicro H13SSF memory upgrade

SKU CH-TVHX-B0EYZ

512 GB DDR5 ECC RDIMM kit of sixteen 32 GB modules at 5600 MT/s CL46 1.1 V, validated for Supermicro H13SSF motherboards

  • Capacity512GB (16 x 32GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 512 GB capacity from sixteen 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches server memory controller requirements
  • 288-pin RDIMM form factor fits Supermicro H13SSF motherboard

Server Memory Kit for Supermicro H13SSF

This 512GB kit contains sixteen 32GB DDR5 5600 RDIMM modules built for the Supermicro H13SSF motherboard. It targets administrators who need to populate every slot with registered ECC memory that the platform recognises at full capacity. The registered design buffers each command so the memory controller remains stable when all channels are fully loaded. Buyers using consumer boards or laptops should look elsewhere, as this kit requires a server platform that supports 288-pin registered DDR5.

DDR5 5600 Registered ECC with CL46 Timing

The decisive specification is the DDR5 5600 speed grade combined with CL46 latency, 1.1V operation and 2Rx8 registered ECC organisation. These parameters must match the motherboard's qualified-vendor list exactly; otherwise the system will either downclock the modules or fail to boot. No other speed, voltage or rank configuration is supported by this kit. Builders who need different timings or a lower capacity per module cannot use this part.

Sixteen-Module Kit Enables Full Population

The package delivers sixteen matched 32GB RDIMMs so every DIMM slot on the H13SSF can be filled in a single purchase. This eliminates the risk of mixing revision codes or rank layouts that can cause intermittent errors in registered ECC configurations. The kit includes no additional cables, software licences or heat spreaders. Administrators who only need a partial upgrade or who prefer to stagger purchases across budget cycles will not benefit from the fixed sixteen-module bundle.

Helstu kostir

  • 512 GB capacity from sixteen 32 GB modules
  • DDR5 5600 speed with CL46 latency for rated performance
  • Registered ECC design corrects single-bit errors automatically
  • 1 V operation matches server memory controller requirements
  • 288-pin RDIMM form factor fits Supermicro H13SSF motherboard

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-328K16
Capacity512GB (16 x 32GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 16X32GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Spurningar um þessa vöru

How does 5600 MT/s CL46 behave once all sixteen slots are populated?

The kit runs at DDR5-5600 with CL46 timing and 1.1 V; registered buffering lets the memory controller drive every slot at that speed without down-clocking.

What does the PC5-44800 label cap in real use?

PC5-44800 is the peak transfer rate for DDR5-5600; actual throughput stays within that ceiling and the registered design keeps it stable across all channels.

Will these 288-pin RDIMMs seat in the H13SSF DIMM sockets?

Yes, the 288-pin registered form factor matches the H13SSF slots exactly; the board requires RDIMMs, not UDIMMs or SODIMMs.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.