Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Six green DDR5 RDIMM modules with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 576GB (6 x 96GB) DDR5 4800 ECC RDIMM CL40 1.1V Supermicro H13SSH-E memory upgrade

SKU CH-8A66-V186S

A 576GB DDR5-4800 registered ECC kit with six 96GB modules at CL40 and 1.1V, validated for the Supermicro H13SSH-E motherboard

  • Capacity576GB (6 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 576GB 6X96GB

Sjá 30 stillingar til viðbótar
  • Massive 576 GB capacity from six 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated throughput
  • Registered ECC design corrects errors and drives full population
  • 1 V operation matches server memory-controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H13SSH-E

Supermicro H13SSH-E DDR5 upgrade

This 576GB kit supplies six 96GB DDR5 4800 RDIMMs built to the exact rank, voltage and timing the Supermicro H13SSH-E memory controller expects. It is intended for administrators who need maximum registered ECC capacity in every available slot.

DDR5 4800 registered ECC limits

DDR5 4800 sets the baseline data rate and the CL40 latency ceiling for this platform; registered buffering allows full-slot population without overloading the memory controller, while ECC corrects single-bit errors on the fly. The 1.1V operating voltage is fixed by the DDR5 standard and cannot be raised for higher speeds.

Verify population rules before ordering

Check the motherboard manual for supported capacities per slot, approved DIMM population order and any BIOS version requirements before purchase. The board requires 288-pin RDIMMs; UDIMM or SODIMM modules will not fit or function.

Helstu kostir

  • Massive 576 GB capacity from six 96 GB modules
  • DDR5 4800 speed with CL40 latency for rated throughput
  • Registered ECC design corrects errors and drives full population
  • 1 V operation matches server memory-controller expectations
  • 288-pin RDIMM form factor verified for Supermicro H13SSH-E

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K6
Capacity576GB (6 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 6X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I pick the 6 x 96 GB kit or a different capacity for the Supermicro H13SSH-E?

The kit provides 576 GB total across six 96 GB modules, matching the board's DDR5 RDIMM slots and population rules for full-speed operation.

What does DDR5 4800 actually deliver once installed in the H13SSH-E?

The modules run at 4800 MT/s with CL40 latency at 1.1 V, giving the rated PC5-38400 bandwidth when the memory controller trains them at that speed.

How does the 288-pin RDIMM interface limit performance on this motherboard?

The registered 288-pin DDR5 RDIMM format is required by the H13SSH-E; it enables all six slots to run fully populated at the rated 4800 MT/s without signal degradation.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.