Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green 288-pin DDR4 UDIMM sticks, no heat spreaders, 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR4 2933MHz CL21 1.2V 288-pin UDIMM memory upgrade

SKU CH-5JR6-7V278

A 64 GB dual-channel kit of two 32 GB DDR4 2933 MHz CL21 unbuffered UDIMMs at 1.2 V for Supermicro workstations

  • Capacity64GB (2 x 32GB)
  • SpeedDDR4 2933 (PC4 23400)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • 64 GB capacity in a dual-channel 2 x 32 GB kit
  • DDR4 2933 MHz speed rated at PC4-23400 bandwidth
  • CL21 CAS latency for responsive system performance
  • 2 V low-voltage operation reduces power draw
  • 288-pin UDIMM form factor fits Supermicro desktop workstations

64GB DDR4 kit for Supermicro workstations

This 64GB kit contains two 32GB DDR4 UDIMM modules rated at 2933MHz with CL21 latency. It is built for Supermicro desktop and SuperWorkstation motherboards such as the MBD-C9Z490-PG. The non-ECC unbuffered design suits systems that do not require error-correcting memory.

Low-voltage operation at 1.2V

Each module runs at 1.20V, matching the standard DDR4 voltage for reduced power draw and heat. Without a heat spreader the sticks rely on case airflow, so a chassis with steady air movement keeps temperatures in check. The unbuffered layout adds no extra electrical load to the memory controller.

Two 288-pin slots required

Installation needs two free 288-pin DDR4 slots on a compatible Supermicro board. The 2Rx8 organisation works with the platform's memory topology without registered buffering. Builders who need ECC protection or registered modules must choose a different kit, as this product provides neither.

Helstu kostir

  • 64 GB capacity in a dual-channel 2 x 32 GB kit
  • DDR4 2933 MHz speed rated at PC4-23400 bandwidth
  • CL21 CAS latency for responsive system performance
  • 2 V low-voltage operation reduces power draw
  • 288-pin UDIMM form factor fits Supermicro desktop workstations

Tæknilýsing

BrandNEMIX RAM
SeriesSuperMicro Server/Workstation Compatible Series Memory
ModelSuperMicro DDR4 2933MHZ Non-ECC Unbuffered UDIMM
Part NumberMD23400-328K2
Capacity64GB (2 x 32GB)
SpeedDDR4 2933 (PC4 23400)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemSupermicro
CAS LatencyCL21
Heat SpreaderNo
Type288-Pin DDR4 UDIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2X32GB) DDR4 2933MHZ PC4-23400 2Rx8 1.2V CL21 288-PIN Non-ECC Unbuffered UDIMM KIT

Spurningar um þessa vöru

How do I install the 288-pin DDR4 UDIMM modules in a Supermicro motherboard, and what step is often missed?

Align the notch on each 32GB module with the slot key, press down evenly until both side clips click shut, then verify in BIOS that both sticks report 2933 MHz at CL21 1.20 V.

What maintenance or replacement will the 2Rx8 unbuffered DIMMs need over time?

No scheduled maintenance is required; if a module fails the lifetime replacement warranty covers it, otherwise the kit runs until a system upgrade makes the DDR4 2933 specification obsolete.

What limit appears first when the 64GB kit runs sustained workloads at 23400 MT/s?

The CL21 latency at 1.20 V is the first bottleneck; thermal throttling is unlikely without a heat spreader, but bandwidth saturates before temperature becomes an issue.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.