Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Four green DDR5 RDIMM modules in a row

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800MHz CL40 1.1V ECC Registered RDIMM Supermicro H14DSG-OD memory upgrade

SKU CH-YXVD-Y490N

A 64 GB DDR5 registered ECC kit of four 16 GB modules running at 4800 MHz CL40 and 1.1 V, validated for the Supermicro H14DSG-OD motherboard

  • Capacity64GB (4 x 16GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 64GB 4X16GB

Sjá 30 stillingar til viðbótar
  • 64 GB total capacity from four 16 GB modules for full server memory population
  • DDR5 4800 MHz CL40 at 1.1 V matches the board's rated speed and voltage
  • ECC and registered design correct single-bit errors and buffer the memory controller
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD motherboard exactly
  • 1Rx8 rank organisation follows the system's population rules for stable operation

System-specific DDR5 upgrade

This 64 GB kit contains four 16 GB DDR5 4800 MHz registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro H14DSG-OD motherboard expects. It is intended for administrators who need to populate all available slots with validated modules. Buyers whose platform requires unbuffered UDIMMs or a different DDR generation cannot use this memory.

Registered ECC limits

The registered architecture buffers address and command signals so the memory controller can drive a fully populated configuration at the rated 4800 MT/s data rate. ECC corrects single-bit errors automatically to prevent silent data corruption. Systems that only accept unbuffered memory or lack ECC support will not work with these modules.

1Rx8 rank and 1.1 V spec

Each module is a single-rank 1Rx8 device operating at 1.10 V with CL40 latency, matching the board’s qualified voltage and timing profile. Deviating from this rank structure or voltage will prevent the system from recognising the full 64 GB capacity at the rated speed.

Helstu kostir

  • 64 GB total capacity from four 16 GB modules for full server memory population
  • DDR5 4800 MHz CL40 at 1.1 V matches the board's rated speed and voltage
  • ECC and registered design correct single-bit errors and buffer the memory controller
  • 288-pin RDIMM form factor fits the Supermicro H14DSG-OD motherboard exactly
  • 1Rx8 rank organisation follows the system's population rules for stable operation

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content64GB 4X16GB DDR5 4800MHz PC5-38400 1Rx8 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Should I choose the 64GB 4x16GB kit or a different capacity for my Supermicro H14DSG-OD?

The 64GB kit provides four 16GB modules to fill four DIMM slots at DDR5-4800 CL40 1.1V registered ECC. Consult your motherboard manual for supported capacities and population order before deciding.

What does DDR5-4800 CL40 mean for real-world throughput in this server?

The modules run at 4800 MT/s with a CAS latency of 40 cycles at 1.1V. Registered ECC buffering lets all four slots operate at this rated speed when populated per the board's rules.

Does the 288-pin RDIMM interface limit the speed or capacity I can use?

The 288-pin registered DDR5 form factor is required by the H14DSG-OD. It supports the kit's 4800 MT/s PC5-38400 data rate and 64GB total capacity when installed in the correct slot sequence.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.