Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Twelve green DDR5 RDIMM modules in a row, bare chips, no heat spreaders, 288-pin edge connectors visible

NEMIX RAM

NEMIX RAM DDR5 4800 1.1TB 12x96GB ECC RDIMM Supermicro H13DSG-O-CPU memory upgrade

SKU CH-ZEQF-1NWNY

A 1.1 TB DDR5 kit of twelve 96 GB registered ECC RDIMMs running at 4800 MHz with CL40 timing, built for full-capacity stability in the Supermicro H13DSG-O-CPU motherboard

  • Capacity1.1TB (12 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 4800 (PC5 38400)
  • CAS LatencyCL40
  • Voltage1.10V
  • ECCYes

Size 1.1TB 12X96GB

Sjá 30 stillingar til viðbótar
  • 1 TB total capacity from twelve 96 GB modules for large-scale workloads
  • DDR5 4800 MT/s speed with CL40 latency matching controller expectations
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 10 V operating voltage and 2Rx4 rank layout specified for the platform
  • 288-pin RDIMM form factor verified for the Supermicro H13DSG-O-CPU motherboard

Exact-fit DDR5 ECC RDIMM kit

This 1.1 TB kit contains twelve 96 GB DDR5-4800 registered DIMMs built for the Supermicro H13DSG-O-CPU motherboard. Each module runs at 1.10 V with CL40 timing and a 2Rx4 organisation. The 288-pin RDIMM form factor matches the board's memory slots exactly.

Registered 2Rx4 architecture at full population

The registered buffer lets the memory controller drive all twelve slots at the rated 4800 MT/s without signal degradation. ECC corrects single-bit errors on the fly, preventing silent data corruption in production workloads. The 2Rx4 rank structure is the specific layout the platform expects for full-capacity operation.

Sustained throughput under continuous load

Registered signalling keeps command timing stable when every channel is saturated for hours. ECC scrubbing runs in the background without adding latency spikes. The 1.10 V operating point maintains consistent power draw across the kit during extended compute runs.

Helstu kostir

  • 1 TB total capacity from twelve 96 GB modules for large-scale workloads
  • DDR5 4800 MT/s speed with CL40 latency matching controller expectations
  • Registered ECC design offloads the controller and corrects single-bit errors
  • 10 V operating voltage and 2Rx4 rank layout specified for the platform
  • 288-pin RDIMM form factor verified for the Supermicro H13DSG-O-CPU motherboard

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR38400-9624K12
Capacity1.1TB (12 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 4800 (PC5 38400)
CAS LatencyCL40
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1.1TB 12X96GB DDR5 4800MHz PC5-38400 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What does the 4800 MHz speed mean when the kit is installed in a Supermicro H13DSG-O-CPU server?

The modules run at DDR5-4800 with CL40 timing and 1.10 V, delivering the rated data rate the board's memory controller expects when all twelve slots are populated.

What does PC5-38400 tell me about the DDR5 interface on this kit?

PC5-38400 is the JEDEC designation for DDR5-4800, confirming the 288-pin RDIMM modules operate at the standard 4800 MT/s data rate with registered buffering.

What physical space and slot type does the 12-module kit require on the motherboard?

The kit needs twelve 288-pin DDR5 RDIMM slots; each 96 GB module is a 2Rx4 registered DIMM without a heat spreader, so it fits standard server DIMM sockets.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.