Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR5 RDIMM modules with black chips, no heat spreader

NEMIX RAM

NEMIX RAM DDR5 5600 128GB (2x64GB) CL46 ECC RDIMM Supermicro X14SDW-40C-SP9F memory upgrade

SKU CH-TFCD-DAJWJ

128GB DDR5-5600 registered ECC kit (2×64GB, CL46, 1.1V, 288-pin) validated for Supermicro X14SDW-40C-SP9F motherboards

  • Capacity128GB (2 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 128GB 2X64GB

  • 128GB total capacity from two 64GB modules for maximum server memory density
  • DDR5 5600MHz PC5-44800 speed matches the motherboard's rated memory controller frequency
  • CL46 CAS latency and 1.1V voltage align with the board's timing and power requirements
  • Registered ECC RDIMM architecture provides error correction and signal buffering for stable fully populated operation
  • 288-pin 2Rx4 form factor fits the Supermicro X14SDW-40C-SP9F memory slots exactly

Purpose-built server upgrade

This 128 GB kit (2 x 64 GB) of DDR5-5600 ECC registered RDIMMs is validated for the Supermicro X14SDW-40C-SP9F motherboard. It delivers the exact rank, voltage and timing the platform expects so every slot is recognised at full capacity and rated speed.

Enterprise stability

Registered architecture offloads the memory controller while ECC corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. Modules operate at 1.1 V with CL46 latency and have no heat spreaders, matching the board's mechanical and electrical requirements.

Fitment check required

Server memory support varies by model; consult your system or motherboard manual for approved DIMM population order, maximum capacities per channel and installation steps before purchase. The 288-pin RDIMM form factor this board requires is not interchangeable with UDIMM or SODIMM modules.

Helstu kostir

  • 128GB total capacity from two 64GB modules for maximum server memory density
  • DDR5 5600MHz PC5-44800 speed matches the motherboard's rated memory controller frequency
  • CL46 CAS latency and 1.1V voltage align with the board's timing and power requirements
  • Registered ECC RDIMM architecture provides error correction and signal buffering for stable fully populated operation
  • 288-pin 2Rx4 form factor fits the Supermicro X14SDW-40C-SP9F memory slots exactly

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K2
Capacity128GB (2 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content128GB 2X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the 288-pin DDR5 RDIMM modules into the Supermicro X14SDW-40C-SP9F motherboard, and what step is often missed?

Power down the server and unplug it. Open the chassis and locate the DDR5 slots. Align the module notch with the slot key, press firmly until both side clips click shut. The step often missed is consulting the motherboard manual for the exact DIMM population order required for 2Rx4 registered modules.

What maintenance or replacement will the 128GB DDR5 ECC RDIMM kit need during its service life?

No scheduled maintenance is required for the memory modules themselves. Keep the server air filters clean and verify cooling airflow so the 1.1V DRAM stays within thermal limits. ECC corrects single-bit errors automatically; if multi-bit errors appear in system logs, replace the affected 64GB module.

What limit appears first when the 5600MHz CL46 registered memory runs under sustained full load?

The primary limit is the memory controller's thermal and electrical envelope when all slots are populated with 2Rx4 registered DIMMs. The registered buffer reduces electrical load, but sustained maximum bandwidth at 5600 MT/s is ultimately constrained by the platform's cooling capacity and power delivery for the 128GB configuration.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.