Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR5 RDIMM modules without heat spreaders, 288-pin, 192GB kit

NEMIX RAM

NEMIX RAM DDR5 5600 ECC Registered RDIMM 192GB (2x96GB) CL46 1.1V 2Rx4 memory upgrade

SKU CH-B72F-N1YAY

A 192GB DDR5-5600 ECC Registered RDIMM kit (2×96GB) built for the Supermicro X14SDV-42C-SP3F with CL46 timing and 1.1V operation

  • Capacity192GB (2 x 96GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 192GB 2X96GB

  • 192 GB capacity with two 96 GB modules for dense server memory
  • DDR5 5600 speed rated at PC5-44800 for high bandwidth
  • Registered ECC RDIMM design corrects errors and buffers signals for stability
  • CL46 latency at 1.1 V matches the motherboard's exact timing requirements
  • Verified fitment for Supermicro X14SDV-42C-SP3F with 288-pin RDIMM form factor

Exact-match server upgrade

This 192GB kit delivers two 96GB DDR5 5600 RDIMMs built to the precise rank, voltage and timing the Supermicro X14SDV-42C-SP3F expects. Registered ECC architecture offloads the memory controller so every slot runs fully populated at rated speed while correcting single-bit errors on the fly. The modules arrive new and ready for installation in the board's 288-pin slots.

Thermals and power draw

Operating at 1.1V, the modules draw minimal power and run without heat spreaders, relying on the server's directed airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep system power steady even with all channels populated. Acoustic impact is negligible in a properly ventilated chassis.

What the kit changes

The bundle provides only the two RDIMMs; no extra cables, software or mounting hardware are included. Compatibility is limited to systems that accept 2Rx4 Registered DDR5 at 5600MT/s, so boards requiring UDIMMs, SODIMMs or different voltages cannot use this kit. Verify your platform's population rules and maximum supported capacity before ordering.

Helstu kostir

  • 192 GB capacity with two 96 GB modules for dense server memory
  • DDR5 5600 speed rated at PC5-44800 for high bandwidth
  • Registered ECC RDIMM design corrects errors and buffers signals for stability
  • CL46 latency at 1.1 V matches the motherboard's exact timing requirements
  • Verified fitment for Supermicro X14SDV-42C-SP3F with 288-pin RDIMM form factor

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-9624K2
Capacity192GB (2 x 96GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content192GB 2X96GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the 288-pin DDR5 RDIMMs in my Supermicro X14SDV-42C-SP3F server?

Power down, open the chassis, align the notch on each 288-pin module with the slot key, press firmly until the locking tabs click, then follow the motherboard manual for the approved population order.

What maintenance or replacement will the 192GB DDR5 ECC RDIMM kit need later?

No routine maintenance is required; ECC corrects single-bit errors automatically, and the modules only need replacement if a multi-bit failure occurs or capacity must be increased.

What limit appears first when the 2Rx4 Registered ECC memory runs sustained workloads at 5600MHz?

The CAS latency of CL46 sets the timing floor, while the registered buffer and 1.1V operation keep signal integrity stable across all populated slots.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.