Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Two green DDR5 ECC UDIMM sticks, no heat spreaders, 288-pin gold contacts visible

NEMIX RAM

NEMIX RAM DDR5 5600MHz 32GB (2x16GB) ECC UDIMM CL46 1.1V 288-pin memory upgrade

SKU CH-QM3N-65PES

A 32GB dual-channel DDR5 ECC UDIMM kit running at 5600MHz with CL46 latency and 1.1V operation, validated for the Supermicro X13SAW-TLN4F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 ECC UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 32GB 2X16GB

  • Error-correcting ECC prevents silent data corruption
  • DDR5 5600 speed with CL46 latency runs at rated performance
  • 32 GB dual-channel kit (2 × 16 GB) maximises motherboard capacity
  • 1 V unbuffered UDIMM matches exact voltage and form factor
  • Verified compatibility with Supermicro X13SAW-TLN4F motherboard

System-specific DDR5 ECC kit

This 32GB kit contains two 16GB DDR5 5600 unbuffered ECC UDIMMs built to the exact rank, voltage and timing the Supermicro X13SAW-TLN4F memory controller expects. It installs as a matched pair so the board recognises the full capacity at its rated speed.

Verified fitment for one motherboard

The modules are confirmed compatible with the Supermicro X13SAW-TLN4F and its DDR5 5600 ECC requirements. The 288-pin UDIMM form factor matches the board's slots, and the 1Rx8 organisation follows the population rules the manual specifies.

1Rx8 unbuffered ECC at 1.1V

The single-rank 1Rx8 layout running at 1.1V is the specification that decides whether this kit works in your system; boards that need registered DIMMs, different ranks or another voltage will not accept it. Builders who need RDIMMs, SODIMMs or non-ECC memory must choose a different kit.

Helstu kostir

  • Error-correcting ECC prevents silent data corruption
  • DDR5 5600 speed with CL46 latency runs at rated performance
  • 32 GB dual-channel kit (2 × 16 GB) maximises motherboard capacity
  • 1 V unbuffered UDIMM matches exact voltage and form factor
  • Verified compatibility with Supermicro X13SAW-TLN4F motherboard

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 ECC Unbuffered UDIMM Memory
Part NumberME44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 ECC UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN ECC UDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Will the 1Rx8 DDR5 modules need replacement after a certain number of write cycles?

The 1Rx8 DDR5 ECC UDIMM modules have no write-cycle limit; they are solid-state DRAM and only require replacement if a hardware fault occurs.

What is the first limit reached when the 32GB DDR5 5600 kit runs sustained workloads?

The CL46 latency at 5600MHz is the primary timing constraint; bandwidth and capacity remain fixed at 32GB and PC5-44800.

How much heat and power does the 1.1V DDR5 ECC kit produce during all-day operation?

At 1.1V the two 16GB UDIMMs draw minimal power and run without a heat spreader, so temperatures stay low in typical server chassis airflow.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.