Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn

NEMIX RAM

NEMIX RAM DDR5 5600MHz 512GB 8x64GB CL46 1.1V 2Rx4 ECC RDIMM memory upgrade

SKU CH-BGFB-A0XND

512 GB DDR5 server kit with eight 64 GB registered ECC modules at 5600 MHz, CL46, 1.1 V, 2Rx4, 288-pin for GIGABYTE MZ23-SU0

  • Capacity512GB (8 x 64GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes
  • 512 GB total capacity across eight 64 GB modules for dense server workloads
  • DDR5-5600 speed rated at PC5-44800 for high-throughput data paths
  • CL46 CAS latency at 1.1 V for stable registered operation
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor verified for GIGABYTE MZ23-SU0 motherboard

512 GB DDR5 RDIMM kit for GIGABYTE MZ23-SU0

This 512 GB kit contains eight 64 GB DDR5 registered DIMMs rated at 5600 MHz with CL46 latency and 1.10 V operation. It is built for the GIGABYTE MZ23-SU0 motherboard and uses the 288-pin RDIMM form factor that the board requires. The 2Rx4 organisation matches the memory-controller expectations for full-capacity recognition.

Thermals noise and power draw

Each module runs at the standard DDR5 1.10 V without a heat spreader, relying on server chassis airflow for cooling. Registered buffering reduces electrical load on the memory controller, helping keep power draw predictable when all eight slots are populated. No active cooling components are included, so acoustic output depends entirely on the host system's fan configuration.

Build quality and daily implications

Major OEM DRAM from Samsung, Micron or Hynix underpins the registered ECC design, which corrects single-bit errors on the fly to prevent silent data corruption. The 288-pin RDIMM connectors key only into compatible DDR5 RDIMM slots, so the kit cannot be installed in UDIMM or SODIMM sockets. Full population of all eight slots follows the motherboard's specific population rules, which must be verified in the system manual before installation.

Helstu kostir

  • 512 GB total capacity across eight 64 GB modules for dense server workloads
  • DDR5-5600 speed rated at PC5-44800 for high-throughput data paths
  • CL46 CAS latency at 1.1 V for stable registered operation
  • ECC and registered design corrects single-bit errors and offloads the memory controller
  • 288-pin RDIMM form factor verified for GIGABYTE MZ23-SU0 motherboard

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-924K8
Capacity512GB (8 x 64GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemGIGABYTE
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content512GB 8X64GB DDR5 5600MHz PC5-44800 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How do I install the 288-pin RDIMM modules into the GIGABYTE MZ23-SU0 and which slot order should I follow?

Power down the server, open the chassis, align each 288-pin RDIMM with the keyed slot, press firmly until the latches click, then populate the eight DIMM slots in the exact sequence listed in the GIGABYTE MZ23-SU0 manual for a full 8 x 64 GB configuration.

Will the ECC RDIMM modules require any firmware updates or periodic re-training to maintain error-correction performance?

No firmware updates or re-training are needed; the on-die ECC logic operates continuously at 1.1 V and CL46, and the registered buffer handles signal integrity for the life of the modules.

What is the first limitation I will hit when running all 512 GB at DDR5-5600 continuously?

The CAS latency of CL46 at 5600 MT/s sets the minimum timing envelope; sustained full-capacity workloads will be bound by this latency figure before any voltage or thermal threshold is reached.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.