Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Twelve green DDR5 RDIMM modules in anti-static packaging

NEMIX RAM

NEMIX RAM DDR5 576GB (12x48GB) 5600MHz CL46 ECC RDIMM Supermicro H14DSG-OM memory upgrade

SKU CH-CB6C-B69ZA

576 GB DDR5 registered ECC server memory kit with twelve 48 GB modules at 5600 MHz CL46 for Supermicro H14DSG-OM motherboards

  • Capacity576GB (12 x 48GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCYes

Size 576GB 12X48GB

Sjá 30 stillingar til viðbótar
  • 576 GB total capacity from twelve 48 GB modules for maximum memory density
  • DDR5 5600 MT/s (PC5-44800) speed matched to the Supermicro H14DSG-OM memory controller
  • ECC registered RDIMM architecture corrects single-bit errors and buffers every slot
  • 2Rx8 dual-rank organisation with 1.1 V operation for stable full-population performance
  • Exact-fit 288-pin kit validated for the Supermicro H14DSG-OM motherboard

Exact-fit DDR5-5600 kit

This 576 GB kit delivers twelve 48 GB registered ECC RDIMMs tuned to DDR5-5600 (PC5-44800) at 1.1 V with CL46 timing. It is built for the Supermicro H14DSG-OM motherboard and matches the rank, voltage and timing the memory controller expects for full-capacity recognition. Server administrators upgrading memory-constrained databases or virtualisation hosts will reach rated speed immediately.

Registered ECC stability

The 288-pin registered design buffers address and command signals so every slot stays stable when all twelve positions are populated. On-die ECC detects and corrects single-bit errors on the fly, preventing silent data corruption and unplanned reboots in production workloads. No heat spreaders are fitted, so airflow clearance follows the chassis and motherboard layout exactly as specified in the system manual.

Twelve-module population kit

The package supplies the complete twelve-module set required to fill the supported channels in one order, removing the risk of mixed-rank or mixed-capacity installations. Lifetime replacement coverage and US-based technical support back the kit for the service life of the server. Buyers needing a different total capacity or a non-registered form factor should verify their platform's qualified-vendor list before purchasing.

Helstu kostir

  • 576 GB total capacity from twelve 48 GB modules for maximum memory density
  • DDR5 5600 MT/s (PC5-44800) speed matched to the Supermicro H14DSG-OM memory controller
  • ECC registered RDIMM architecture corrects single-bit errors and buffers every slot
  • 2Rx8 dual-rank organisation with 1.1 V operation for stable full-population performance
  • Exact-fit 288-pin kit validated for the Supermicro H14DSG-OM motherboard

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR44800-4828K12
Capacity576GB (12 x 48GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content576GB 12X48GB DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

What speed does the DDR5-5600 interface run at when all 12 slots are populated?

The kit is rated for DDR5-5600 (PC5-44800) at CL46 with 1.10V; the registered design lets every slot run at that speed when fully populated.

Does the 288-pin RDIMM form factor match the Supermicro H14DSG-OM DIMM slots?

Yes, the modules are 288-pin DDR5 RDIMMs, the exact registered form factor the H14DSG-OM motherboard requires.

What population order should I follow when installing the 12 modules?

Consult the H14DSG-OM manual for the approved DIMM population sequence; installing in the wrong order can prevent the server from recognising the full 576GB capacity.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.