Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Six green DDR5 RDIMM modules in anti-static tray

NEMIX RAM

NEMIX RAM DDR5 6400 768GB (6×128GB) ECC RDIMM CL52 1.1V Supermicro H14SSL-N memory upgrade

SKU CH-134A-ZAT9Q

A 768 GB DDR5 ECC RDIMM kit of six 128 GB modules at 6400 MHz CL52 1.1 V, registered for full-capacity stability on Supermicro H14SSL-N motherboards

  • Capacity768GB (6 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 768GB 6X128GB

Sjá 24 stillingar til viðbótar
  • 768 GB total capacity from six 128 GB modules for memory-intensive workloads
  • DDR5-6400 speed with CL52 latency delivers rated throughput for Supermicro H14SSL-N
  • Registered ECC RDIMM architecture corrects single-bit errors and supports full population
  • 1 V operation matches the platform's memory controller specification exactly
  • Major OEM Samsung, Micron, or Hynix chips ensure enterprise-grade component quality

768GB DDR5-6400 ECC RDIMM kit

This 768GB kit contains six 128GB DDR5-6400 registered ECC RDIMMs built for the Supermicro H14SSL-N motherboard. The modules run at PC5-51200 with CL52 latency and 1.10V voltage. Registered buffering and on-die ECC protect data integrity across all populated slots. The 288-pin form factor matches the board's memory sockets exactly.

Not for non-ECC or UDIMM systems

Buyers who need unbuffered UDIMMs or non-ECC memory for workstations cannot use this kit. The registered RDIMM design and ECC function require a server chipset that supports both features. Systems limited to lower capacities or different pin layouts will not recognise these modules. Always verify the motherboard manual for approved population rules.

Registered ECC with 2Rx4 organisation

Each module uses a 2Rx4 rank structure that the memory controller expects for full-capacity operation. This organisation enables the 768GB total across six slots at the rated 6400MT/s speed. A different rank configuration would change population limits and prevent the kit from running at its specified frequency.

Helstu kostir

  • 768 GB total capacity from six 128 GB modules for memory-intensive workloads
  • DDR5-6400 speed with CL52 latency delivers rated throughput for Supermicro H14SSL-N
  • Registered ECC RDIMM architecture corrects single-bit errors and supports full population
  • 1 V operation matches the platform's memory controller specification exactly
  • Major OEM Samsung, Micron, or Hynix chips ensure enterprise-grade component quality

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-724K6
Capacity768GB (6 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content768GB 6X128GB DDR5 6400MHz PC5-51200 2Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

Does the Supermicro H14SSL-N motherboard need to support DDR5 6400 RDIMMs for this kit to work?

Yes, the board must accept 288-pin DDR5 RDIMMs running at 6400 MT/s with 1.1V operation and registered ECC; otherwise the modules will not be recognised or will run at a lower speed.

Can I mix these 2Rx4 registered ECC modules with other registered ECC DIMMs already installed in the H14SSL-N?

Mixing is possible only if the existing DIMMs are also DDR5 RDIMMs with the same 2Rx4 organisation, 1.1V voltage and CL52 timing; the motherboard manual defines the approved population order for mixed ranks.

How do I confirm the full 768 GB is running at the rated 6400 MT/s after installation?

Enter the BIOS or use a tool such as dmidecode to verify each of the six slots shows 128 GB, DDR5-6400, 1.1V, registered ECC and CL52 latency with no errors reported.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.