Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Eight green DDR5 RDIMM modules in a row, no heat spreaders, gold contacts visible

NEMIX RAM

NEMIX RAM MR51200-744K8 1TB 8x128GB DDR5 6400MHz CL52 4Rx4 1.1V ECC RDIMM memory upgrade

SKU CH-DBVP-4J49M

Eight 128 GB DDR5 RDIMMs deliver 1 TB of registered ECC memory at 6400 MHz with CL52 latency and 1.1 V operation for the Supermicro X14SRA-F motherboard

  • Capacity1TB (8 x 128GB)
  • Type288-Pin DDR5 RDIMM
  • SpeedDDR5 6400 (PC5 51200)
  • CAS LatencyCL52
  • Voltage1.10V
  • ECCYes

Size 1TB 8X128GB

Sjá 4 stillingar til viðbótar
  • 1TB total capacity with eight 128GB modules for high-density server workloads
  • DDR5 6400 speed rated at CL52 latency for responsive data throughput
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1V operation reduces power draw across fully populated memory channels
  • 288-pin RDIMM form factor validated for Supermicro X14SRA-F motherboard compatibility

1TB DDR5-6400 ECC RDIMM kit for Supermicro X14SRA-F

This 1 TB kit contains eight 128 GB DDR5-6400 (PC5-51200) registered ECC RDIMMs built to the exact rank, voltage and timing the Supermicro X14SRA-F memory controller expects. Each module runs at 1.1 V with CL52 latency and a 4Rx4 organisation across 288 pins.

Sustained-load stability from registered ECC

The registered design buffers address and command signals so every slot remains fully populated at rated speed without overloading the memory controller. On-die ECC detects and corrects single-bit errors in real time, preventing silent data corruption and unplanned reboots during continuous server workloads.

Direct replacement for smaller

Install this kit when the platform demands maximum supported capacity and the qualified speed of DDR5-6400 with 4Rx4 registration. The upgrade is worthwhile only if the system manual confirms 1 TB total capacity and the specific population order required for eight modules.

Helstu kostir

  • 1TB total capacity with eight 128GB modules for high-density server workloads
  • DDR5 6400 speed rated at CL52 latency for responsive data throughput
  • Registered ECC architecture corrects single-bit errors to protect data integrity
  • 1V operation reduces power draw across fully populated memory channels
  • 288-pin RDIMM form factor validated for Supermicro X14SRA-F motherboard compatibility

Tæknilýsing

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Server Memory
ModelDDR5 ECC RDIMM Registered Server Memory
Part NumberMR51200-744K8
Capacity1TB (8 x 128GB)
Type288-Pin DDR5 RDIMM
SpeedDDR5 6400 (PC5 51200)
CAS LatencyCL52
Voltage1.10V
ECCYes
Buffered/RegisteredRegistered
Rank4Rx4
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 ECC RDIMM Motherboard Compatible
Package Content1TB 8X128GB DDR5 6400MHz PC5-51200 4Rx4 1.1V 288-PIN ECC RDIMM KIT

Aðrar útgáfur af þessari vöru

5 í viðbót í sama vöruflokki

Sama fjölskylda, mismunandi minni, kælingu eða klukkuhraða — berðu saman áður en þú ákveður þig.

Spurningar um þessa vöru

How much power does the 1TB DDR5 6400MHz kit draw at its rated 1.1V voltage?

Each 128GB module operates at 1.1V, so the full 8-module kit draws power at that voltage when running at DDR5 6400 speed with CL52 timings.

What motherboard slot and memory controller features are required for these 288-pin RDIMMs?

The kit needs a motherboard with 288-pin DDR5 RDIMM slots that supports Registered ECC memory, 4Rx4 rank configuration, and DDR5 6400MHz operation.

Will these 4Rx4 Registered ECC modules work in a system that currently uses 2Rx8 UDIMMs?

No, the Registered RDIMM form factor and 4Rx4 organization require a motherboard and memory controller designed for Registered ECC DDR5, not UDIMM slots.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.