Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Green circuit board with black memory chips, gold edge connector, no heat spreader

NEMIX RAM

NEMIX RAM POSIFLEX POS Series 8GB DDR4 2133 CL15 2Rx8 1.2V 260-pin SODIMM memory upgrade

SKU CH-569Y-R93JT

8 GB DDR4 2133 SODIMM for POSIFLEX RT-5015E terminals, CL15 1.2 V unbuffered non-ECC

  • Capacity8GB
  • SpeedDDR4 2133 (PC4 17000)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.20V
  • Designed for POSIFLEX RT-5015E terminal compatibility
  • 8GB DDR4 2133MHz CL15 for responsive operation
  • 2V low-voltage DDR4 reduces power draw
  • 260-pin SODIMM form factor fits the slot
  • Built with Samsung, Micron or Hynix chips

POSIFLEX POS Series 8GB SODIMM

This 8GB DDR4 2133 CL15 module is built for POSIFLEX POS terminals such as the RT-5015E. It uses a 260-pin SODIMM form factor with 2Rx8 organisation and runs at 1.2V. The part number is MS17000-828K1.

Suits POSIFLEX kiosk upgrades; not for ECC systems

Installers upgrading a compatible POSIFLEX point-of-sale unit will find this non-ECC unbuffered stick a direct fit. Systems that require registered or ECC memory cannot use this module. Buyers needing a different capacity or speed should look elsewhere.

DDR4 2133 CL15 1.2V 260-pin SODIMM

The decisive specification is the DDR4 2133 CL15 1.2V 260-pin SODIMM interface. Only boards designed for this exact speed, voltage and pin count will accept the module. Verify the terminal’s memory slot specification before purchase.

Helstu kostir

  • Designed for POSIFLEX RT-5015E terminal compatibility
  • 8GB DDR4 2133MHz CL15 for responsive operation
  • 2V low-voltage DDR4 reduces power draw
  • 260-pin SODIMM form factor fits the slot
  • Built with Samsung, Micron or Hynix chips

Tæknilýsing

BrandNEMIX RAM
SeriesPOSIFLEX POS Series Point of Sale Kiosk Memory
ModelPOSIFLEX POS DDR4 2133MHZ Non-ECC Unbuffered SODIMM
Part NumberMS17000-828K1
Capacity8GB
SpeedDDR4 2133 (PC4 17000)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.20V
Compatible SystemPOSIFLEX POS
CAS LatencyCL15
Heat SpreaderNo
Type260-Pin DDR4 SODIMM
Rank2Rx8
FeaturesDDR4 Non-ECC Unbuffered SODIMM Motherboard Compatible
Package Content8GB (1X8GB) DDR4 2133MHZ PC4-17000 2Rx8 1.2V CL15 260-PIN Non-ECC Unbuffered SODIMM

Spurningar um þessa vöru

What does the 2133 MHz speed mean for daily use on the POSIFLEX RT-5015E terminal?

The module runs at DDR4 2133 (PC4-17000) with CL15 latency, delivering the standard data rate the terminal's memory controller expects for stable operation.

How does the 260-pin SODIMM interface limit compatibility?

The 260-pin DDR4 SODIMM fits only DDR4 SO-DIMM slots keyed for that pin count; it will not seat in DDR5 SO-DIMM sockets or 288-pin DIMM slots.

What physical space and voltage does the module require to install?

It needs a single 260-pin DDR4 SO-DIMM socket and operates at 1.20 V with no heat spreader, so it fits slim terminal chassis without clearance issues.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.