Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Black USB 3.0 adapter box with SATA and dual IDE ports, power brick and cables

NShi

NShi USB 3.0 to IDE & SATA Hard Drive Adapter Kit 2.5"/3.5

SKU CH-DB5Z-JTC7X

Connect 2.5"/3.5" IDE and SATA drives via USB 3.0 with simultaneous dual-drive access, 6 Gbps SATA III speeds, and included power adapter

  • SpecificationsAdapter/Converter, USB 3.0, LINKPAL, Does Not Apply
  • Connector AUSB 3.0
  • Connector StyleStandard
  • FeaturesUSB 3.0
  • Connect 2.5"/3.5" SATA and IDE drives via USB 3.0
  • Access one IDE and one SATA drive simultaneously
  • Transfer data up to 6 Gbps through SATA III interface
  • Power 3.5" IDE drives with included 4-pin power cable
  • One-touch backup and hot-swap with on/off switch protection

USB 3.0 IDE and SATA Adapter Kit

This USB 3.0 adapter connects 2.5-inch and 3.5-inch IDE or SATA hard drives and optical drives to a computer with a USB-A port. It includes a dual-head IDE connector (40-pin and 44-pin) and a SATA III connector for broad compatibility with legacy and current drives.

Suits users retrieving data from mixed drive types

Ideal for technicians and home users who need to access older IDE drives alongside SATA drives without installing them internally. Not suitable for systems lacking USB-A ports, for drives requiring interfaces other than IDE or SATA, or for purely internal drive installations.

Handles simultaneous IDE and SATA access

Supports up to two drives at once (one IDE and one SATA) with SATA III data rates up to 6 Gbps and USB 3.0 speeds up to 5 Gbps. The included 12 V 2 A power adapter and 4-pin power cable provide stable power for 3.5-inch drives. Transfer rates fall back to USB 2.0 or 1.1 when connected to older ports.

Helstu kostir

  • Connect 2.5"/3.5" SATA and IDE drives via USB 3.0
  • Access one IDE and one SATA drive simultaneously
  • Transfer data up to 6 Gbps through SATA III interface
  • Power 3.5" IDE drives with included 4-pin power cable
  • One-touch backup and hot-swap with on/off switch protection

Tæknilýsing

BrandSoNNeT
ModelDoes Not Apply
Part NumberDoes Not Apply
SpecificationsAdapter/Converter, USB 3.0, LINKPAL, Does Not Apply
Connector AUSB 3.0
Connector StyleStandard
FeaturesUSB 3.0

Spurningar um þessa vöru

Do I need a separate power outlet for the 12 V 2 A adapter that comes in the box?

Yes, the 12 V 2 A power adapter plugs into mains power and must be connected for stable operation of 3.5″ drives.

Can I run a 40-pin IDE drive and a SATA drive at the same time through this adapter?

The kit supports one IDE drive (40-pin or 44-pin) plus one SATA drive simultaneously over the single USB 3.0 link.

How do I know the adapter is transferring data after I flip the on/off switch?

The LED on the unit lights for power and blinks during read/write activity.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.